[PATCH 1/2] powerpc/e500: make load_up_spe a normal fuction

So that we can call it in kernel.

Signed-off-by: Liu Yu <redacted>
---
 arch/powerpc/kernel/head_fsl_booke.S |   23 ++++++-----------------
 1 files changed, 6 insertions(+), 17 deletions(-)

diff --git a/arch/powerpc/kernel/head_fsl_booke.S b/arch/powerpc/kernel/head_fsl_booke.S
index d5d78c4..c96e025 100644
--- a/arch/powerpc/kernel/head_fsl_booke.S
+++ b/arch/powerpc/kernel/head_fsl_booke.S

@@ -539,8 +539,10 @@ interrupt_base:
 	/* SPE Unavailable */
 	START_EXCEPTION(SPEUnavailable)
 	NORMAL_EXCEPTION_PROLOG
-	bne	load_up_spe
-	addi	r3,r1,STACK_FRAME_OVERHEAD
+	beq	1f
+	bl	load_up_spe
+	b	fast_exception_return
+1:	addi	r3,r1,STACK_FRAME_OVERHEAD
 	EXC_XFER_EE_LITE(0x2010, KernelSPE)
 #else
 	EXCEPTION(0x2020, SPEUnavailable, unknown_exception, EXC_XFER_EE)

@@ -743,7 +745,7 @@ tlb_write_entry:
 /* Note that the SPE support is closely modeled after the AltiVec
  * support.  Changes to one are likely to be applicable to the
  * other!  */
-load_up_spe:
+_GLOBAL(load_up_spe)
 /*
  * Disable SPE for the task which had SPE previously,
  * and save its SPE registers in its thread_struct.

@@ -791,20 +793,7 @@ load_up_spe:
 	subi	r4,r5,THREAD
 	stw	r4,last_task_used_spe@l(r3)
 #endif /* !CONFIG_SMP */
-	/* restore registers and return */
-2:	REST_4GPRS(3, r11)
-	lwz	r10,_CCR(r11)
-	REST_GPR(1, r11)
-	mtcr	r10
-	lwz	r10,_LINK(r11)
-	mtlr	r10
-	REST_GPR(10, r11)
-	mtspr	SPRN_SRR1,r9
-	mtspr	SPRN_SRR0,r12
-	REST_GPR(9, r11)
-	REST_GPR(12, r11)
-	lwz	r11,GPR11(r11)
-	rfi
+	blr
 
 /*
  * SPE unavailable trap from kernel - print a message, but let

-- 
1.6.4

On Mon, Feb 27, 2012 at 4:59 AM, Olivia Yin [off-list ref] wr=
ote:

So that we can call it in kernel.

And why would we want that?

--=20
Timur Tabi
Linux kernel developer at Freescale=

On 02/27/2012 04:59 AM, Olivia Yin wrote:

So that we can call it in kernel.

Signed-off-by: Liu Yu <redacted>

Explain why we want this, and point out that this makes it similar to
load_up_fpu.

---
 arch/powerpc/kernel/head_fsl_booke.S |   23 ++++++-----------------
 1 files changed, 6 insertions(+), 17 deletions(-)

When posting a patch authored by someone else, more or less unchanged,
you should put a From: line in the body of the e-mail.

git send-email will do this automatically if you preserve the authorship
in the git commit.

Also, you should add your own Signed-off-by.

-Scott
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On 02/28/2012 08:09 AM, Yin Olivia-R63875 wrote:

Hi Scott,

This had been reviewed before and accepted by internal tree.
http://linux.freescale.net/patchwork/patch/11100/
http://git.am.freescale.net/gitolite/gitweb.cgi/sdk/kvm.git/commit/?h=for-sdk1.2&id=c5088844dc665dbdae4fa51b8d58dc203bacc17e

I didn't change anything except the line.
I just commit to external kvm-ppc mailing list. Should I add my own Signed-off-by?

Yes, if you just take a patch from someone else and direct it to another 
tree, you keep the From: line (git cherry-pick or git am should do that 
automatically for you) and add your own SOB-line (git am -s can do that 
for example).

Since you're also supposed to change the description, please note that 
between Yu's SOB line and your SOB line with something like

Signed-off-by: Liu Yu<redacted>
[olivia: change description]
Signed-off-by: Olivia Yin<redacted>



Alex