[PATCH] USB: ehci-fsl: Turn on cache snooping on MPC8xxx

If a MPC8xxx was being used, 'have_sysif_regs' should be set and
it should setup cache snooping for all the 4GB space on both PPC32
and PPC64.

Signed-off-by: Pan Jiafei <redacted>
---
 drivers/usb/host/ehci-fsl.c |   23 ++++++++++-------------
 1 files changed, 10 insertions(+), 13 deletions(-)

diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c
index c26a82e..8327d3e 100644
--- a/drivers/usb/host/ehci-fsl.c
+++ b/drivers/usb/host/ehci-fsl.c

@@ -252,21 +252,18 @@ static int ehci_fsl_usb_setup(struct ehci_hcd *ehci)
 	if (pdata->have_sysif_regs) {
 		temp = in_be32(non_ehci + FSL_SOC_USB_CTRL);
 		out_be32(non_ehci + FSL_SOC_USB_CTRL, temp | 0x00000004);
-		out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0000001b);
-	}
 
-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
-	/*
-	 * Turn on cache snooping hardware, since some PowerPC platforms
-	 * wholly rely on hardware to deal with cache coherent
-	 */
+		/*
+		* Turn on cache snooping hardware, since some PowerPC platforms
+		* wholly rely on hardware to deal with cache coherent
+		*/
 
-	/* Setup Snooping for all the 4GB space */
-	/* SNOOP1 starts from 0x0, size 2G */
-	out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
-	/* SNOOP2 starts from 0x80000000, size 2G */
-	out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
-#endif
+		/* Setup Snooping for all the 4GB space */
+		/* SNOOP1 starts from 0x0, size 2G */
+		out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);
+		/* SNOOP2 starts from 0x80000000, size 2G */
+		out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);
+	}
 
 	if ((pdata->operating_mode == FSL_USB2_DR_HOST) ||
 			(pdata->operating_mode == FSL_USB2_DR_OTG))

-- 
1.7.5.1

On Fri, Feb 17, 2012 at 1:57 PM, Pan Jiafei [off-list ref] wrot=
e:

If a MPC8xxx was being used, 'have_sysif_regs' should be set and
it should setup cache snooping for all the 4GB space on both PPC32
and PPC64.

Signed-off-by: Pan Jiafei <redacted>

Hi Jiafei,

You should have sent this patch upstream earlier.  I remember you
asked about it a few months ago. :)

Acked-by: Li Yang <redacted>

)

=C2=A0 =C2=A0 =C2=A0 =C2=A0if (pdata->have_sysif_regs) {
=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0temp =3D in_be32(n=

on_ehci + FSL_SOC_USB_CTRL);

=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0out_be32(non_ehci =

+ FSL_SOC_USB_CTRL, temp | 0x00000004);

- =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 out_be32(non_ehci + FS=

L_SOC_USB_SNOOP1, 0x0000001b);

- =C2=A0 =C2=A0 =C2=A0 }

-#if defined(CONFIG_PPC32) && !defined(CONFIG_NOT_COHERENT_CACHE)
- =C2=A0 =C2=A0 =C2=A0 /*
- =C2=A0 =C2=A0 =C2=A0 =C2=A0* Turn on cache snooping hardware, since som=

e PowerPC platforms

- =C2=A0 =C2=A0 =C2=A0 =C2=A0* wholly rely on hardware to deal with cache=

 coherent

- =C2=A0 =C2=A0 =C2=A0 =C2=A0*/
+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /*
+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 * Turn on cache snoopi=

ng hardware, since some PowerPC platforms

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 * wholly rely on hardw=

are to deal with cache coherent

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 */

- =C2=A0 =C2=A0 =C2=A0 /* Setup Snooping for all the 4GB space */
- =C2=A0 =C2=A0 =C2=A0 /* SNOOP1 starts from 0x0, size 2G */
- =C2=A0 =C2=A0 =C2=A0 out_be32(non_ehci + FSL_SOC_USB_SNOOP1, 0x0 | SNOO=

P_SIZE_2GB);

- =C2=A0 =C2=A0 =C2=A0 /* SNOOP2 starts from 0x80000000, size 2G */
- =C2=A0 =C2=A0 =C2=A0 out_be32(non_ehci + FSL_SOC_USB_SNOOP2, 0x80000000=

 | SNOOP_SIZE_2GB);

-#endif
+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /* Setup Snooping for =

all the 4GB space */

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /* SNOOP1 starts from =

0x0, size 2G */

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 out_be32(non_ehci + FS=

L_SOC_USB_SNOOP1, 0x0 | SNOOP_SIZE_2GB);

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 /* SNOOP2 starts from =

0x80000000, size 2G */

+ =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 out_be32(non_ehci + FS=

L_SOC_USB_SNOOP2, 0x80000000 | SNOOP_SIZE_2GB);

+ =C2=A0 =C2=A0 =C2=A0 }

=C2=A0 =C2=A0 =C2=A0 =C2=A0if ((pdata->operating_mode =3D=3D FSL_USB2_DR_=

HOST) ||

=C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=A0 =C2=

=A0 =C2=A0(pdata->operating_mode =3D=3D FSL_USB2_DR_OTG))

--
1.7.5.1