# \[PATCH v12 0/6\] flexcan/powerpc: Add support for powerpc flexcan (freescale p1010)

- From: Robin Holt \<hidden\>
- Date: 2011-08-11 16:07:21 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2011/08/9465897
- Thread: https://ratatoskr.run/netdev/2011/08/9465897/t.md

```text
With all the patches applied, my p1010rdb works for communicating between
its two can ports and also can communicate with an external PSOC.
I have done no testing beyond compile testing for an arm system as I
have no access to an arm based system.

With the latest version, changes to the arch tree really only reflect
changes in the drivers/net/can tree.  I, therefore, believe it is
probably best to route them through David S. Miller's netdev tree.
Wolfgang and Kumar, does that seem correct to you?

Thanks,
Robin Holt
```