On Mon, 1 Aug 2011 17:01:27 +0530
[off-list ref] wrote:

quoted

Did you try passing 'console=ttyCPM0' to the bootargs?
I have tried ttyCPM0 no use.

Have you tried specifying the baud rate?

Do I need to modify something on boot loader or is there any boot loader
can support CPM ?

Scott,
Is cpm_console_init() must be initialized to fix this issue?

Please start with the latest kernel.  Upgrade U-Boot as well if you have a
way to recover if the new image doesn't work (e.g. a BDI).

You don't need the bootwrapper for the main serial driver to work.  You may
need some board-specific pin/port init, though at least the serial port
that U-Boot uses should already be set up, assuming it worked in U-Boot
of course. :-)

If it still doesn't work after switching to a current kernel, try dumping
CPM registers, instrumenting the driver, etc. to see what's going on.

-Scott