ppc 6xx
In platform_init function of sandpoint.c , I delete the code of
getting command line from uboot, and set command_line to a fixed value
, which are like this:
sandpoint.c--> platform_init
#if 0
if (r3 && r6) {
/* copy board info structure */
memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
/* copy command line */
*(char *)(r7+KERNELBASE) = 0;
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
#endif
strcpy(cmd_line, "xxx");
But I found that , when calling start_kernel in head.S (by rfi
instruction), the borad was reset into uboot, that is :
li r4,MSR_KERNEL
FIX_SRR1(r4,r5)
lis r3,start_kernel@h
ori r3,r3,start_kernel@l
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
SYNC
RFI //reset,why?
The RFI instruction here, caused the board reset to uboot. Can
someone give me some advice on how could this happened?
Thank you
wilbur.chan wrote:
ppc 6xx
In platform_init function of sandpoint.c , I delete the code of
getting command line from uboot, and set command_line to a fixed value
, which are like this:
sandpoint.c--> platform_init
#if 0
if (r3 && r6) {
/* copy board info structure */
memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
/* copy command line */
*(char *)(r7+KERNELBASE) = 0;
strcpy(cmd_line, (char *)(r6+KERNELBASE));
}
#endif
strcpy(cmd_line, "xxx");
Which version your kernel is ? I cant find sandpoint.c in powerpc git tree.
And I suspect it's conditional "if (r3 && r6)" to copy cmd_line, and
your change makes it unconditioned. Maybe it
will affect something.
Tony
But I found that , when calling start_kernel in head.S (by rfi
instruction), the borad was reset into uboot, that is :
li r4,MSR_KERNEL
FIX_SRR1(r4,r5)
lis r3,start_kernel@h
ori r3,r3,start_kernel@l
mtspr SPRN_SRR0,r3
mtspr SPRN_SRR1,r4
SYNC
RFI //reset,why?
The RFI instruction here, caused the board reset to uboot. Can
someone give me some advice on how could this happened?
Thank you
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/linuxppc-dev
--
Tony Liu | Liu Bo
-------------------------------------------------------------
WIND RIVER | China Development Center
Tel: 86-10-8477-8542 ext: 8542 | Fax: 86-10-64790367
(M): 86-136-7117-3612
Address: 15/F, Wangjing TowerB, Chaoyang District, Beijing, P.R.China