Broken network for different u-boot compilation
From: Duy-Ky Nguyen <hidden>
Date: 2008-11-07 18:08:01
Hello, I'm using u-boot 1.3.0 from the latest FreeScale Linux BSP MPC8313E-RDB. If I set TEXT_BASE = 0x1000000, so I could use BDI debugger to load into RAM and run it out of RAM. I'm ABLE to ping to the host from u-boot But, if I set TEXT_BASE=0xFE000000, and burn the image it into Flash, recycle the power to run it out of Flash. I'm NOT able to ping from u-boot with error message "No link". When I change TEXT_BASE from 0x1000000 to 0xFE000000, I have to do "make clean" before "make", otherwise it have error message " undefined reference to 'env_name_space'" On the other direction, when I change TEXT_BASE from 0xFE000000 to 0x1000000, I have successful compilation without "make clean", but the u-boot hangs at "DRAM". I have to do "make clean" for successful u-boot AND network access. I really appreciate your time and help. Regards, Duy-Ky ----- Original Message ----- From: [off-list ref] To: <redacted> Sent: Thursday, November 06, 2008 5:00 PM Subject: Linuxppc-embedded Digest, Vol 51, Issue 9
Send Linuxppc-embedded mailing list submissions to linuxppc-embedded@ozlabs.org To subscribe or unsubscribe via the World Wide Web, visit https://ozlabs.org/mailman/listinfo/linuxppc-embedded or, via email, send a message with subject or body 'help' to linuxppc-embedded-request@ozlabs.org You can reach the person managing the list at linuxppc-embedded-owner@ozlabs.org When replying, please edit your Subject line so it is more specific than "Re: Contents of Linuxppc-embedded digest..." Today's Topics: 1. Using DMA (Bruce_Leonard@selinc.com) 2. Re: Using DMA (Scott Wood) 3. Re: Using DMA (Bill Gatliff) 4. Re: Using DMA (Bruce_Leonard@selinc.com) 5. Re: Using DMA (Bill Gatliff) ---------------------------------------------------------------------- Message: 1 Date: Wed, 5 Nov 2008 18:07:20 -0800 From: <redacted> Subject: Using DMA To: <redacted> Message-ID: [off-list ref] Content-Type: text/plain; charset="US-ASCII" This may be the wrong forum for this question. If so I apologize, and could someone please tell me the appropriate place to ask? Assuming this is the right place, I'm working with the 2.6.27 (stable) kernel and an MPC8347E processor. I'm using a custom NAND controller and