USB problems in 2.6.28-rc*

Anybody else seeing USB problems in the 2.6.28 kernels? The warp has a
USB 1.1 port off the 440EP processor. 

In 2.6.26 we had some problems with certain USB keys, but 2.6.27 fixed
it. However, the 2.6.28 stream broke it again before rc1. We get this
twice when you try to use the usb key:

sd 0:0:0:0: [sda] 990865 512-byte hardware sectors: (507 MB/483 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
sd 0:0:0:0: timing out command, waited 60s

It then seems to work. I haven't looked into it too much since we
aren't switching to 2.6.28 anytime soon (it breaks our Secure Digital
card driver).

But I am hoping somebody might know a quick fix... something like "have
you got CONFIG_x set" type answer ;)

Cheers,
   Sean

On Sat, 2008-11-15 at 14:42 -0500, Sean MacLennan wrote:

Anybody else seeing USB problems in the 2.6.28 kernels? The warp has a
USB 1.1 port off the 440EP processor. 

In 2.6.26 we had some problems with certain USB keys, but 2.6.27 fixed
it. However, the 2.6.28 stream broke it again before rc1. We get this
twice when you try to use the usb key:

Please reports this to the linux-usb mailing list ! (You can keep this
list on CC but the main people capable to help you are over there)

Cheers,
Ben.

sd 0:0:0:0: [sda] 990865 512-byte hardware sectors: (507 MB/483 MiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Assuming drive cache: write through
 sda: sda1
sd 0:0:0:0: [sda] Attached SCSI removable disk
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
usb 1-1: reset full speed USB device using ppc-of-ohci and address 2
sd 0:0:0:0: timing out command, waited 60s

It then seems to work. I haven't looked into it too much since we
aren't switching to 2.6.28 anytime soon (it breaks our Secure Digital
card driver).

But I am hoping somebody might know a quick fix... something like "have
you got CONFIG_x set" type answer ;)

Cheers,
   Sean
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev