Watchdog usage on MPC5200B platform

Hi,

has anybody an idea why when I'm using drivers/watchdog/mpc5200_wdt.c, the=
=20
system freezes instead of doing a restart?

When I'm running the "reboot" command it does a restart as expected.

=46or both cases the same hardware will be used (WDT in timer@600 marked=20
with "fsl,has-wdt" in the oftree).

Regards
Juergen

=2D-=20
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
=A0Pengutronix - Linux Solutions for Science and Industry
=A0   Handelsregister: Amtsgericht Hildesheim, HRA 2686
=A0 =A0 =A0    Vertretung Sued/Muenchen, Germany
   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9

Hi,

On Donnerstag, 25. September 2008, Juergen Beisert wrote:

has anybody an idea why when I'm using drivers/watchdog/mpc5200_wdt.c, the
system freezes instead of doing a restart?

Once again: It does a restart with kernel 2.6.23, but not with 2.6.26. Agai=
n=20
it seems something related is not setup correctly. Any idea? I didn't find=
=20
anything special in the MPC5200B generic part of 2.6.23.

Juergen

=2D-=20
Dipl.-Ing. Juergen Beisert | http://www.pengutronix.de
=A0Pengutronix - Linux Solutions for Science and Industry
=A0   Handelsregister: Amtsgericht Hildesheim, HRA 2686
=A0 =A0 =A0    Vertretung Sued/Muenchen, Germany
   Phone: +49-8766-939 228 |  Fax: +49-5121-206917-9