Hello!
When I boot the kerenl which was compiled by myself on the ML403,but it hang on "booting the kernel ",the prompt information is as follow:
Linux
uncompressing the kernel ....done
Now booting the kernel
and then there is nothing .
The linux code I used is linux-2.6-xlix,the version is 2.6.22.And I use the uartlite IP.And use the XMD to download the kernel,the command is dow zImage.elf,con.
I don't know what the problem is.Can you give me a help? Thanks you!
On 7/17/08, wsz_422 [off-list ref] wrote:
Hello!
When I boot the kerenl which was compiled by myself on the ML403,but
it hang on "booting the kernel ",the prompt information is as follow:
Linux
uncompressing the kernel ....done
Now booting the kernel
and then there is nothing .
The linux code I used is linux-2.6-xlix,the version is 2.6.22.And I use
the uartlite IP.And use the XMD to download the kernel,the command is dow
zImage.elf,con.
I don't know what the problem is.Can you give me a help? Thanks you!
Most likely is that the root name in your device tree doesn't match a
name that has been compiled into the kernel.
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
--
Jon Smirl
jonsmirl@gmail.com
On Thu, Jul 17, 2008 at 8:43 PM, wsz_422 [off-list ref] wrote:
Hello!
When I boot the kerenl which was compiled by myself on the ML403,but
it hang on "booting the kernel ",the prompt information is as follow:
Linux
uncompressing the kernel ....done
Now booting the kernel
and then there is nothing .
This problem comes up a lot. Try searching the archives for ML403 and
__log_buf.