Videomode 800x480

8 messages, 3 authors, 2008-07-18 · open the first message on its own page

Videomode 800x480

From: Alex_SYS <hidden>
Date: 2008-07-15 17:24:37 

Hello, I have the problem that I need a Framebuffer resolution 800x480!
Since now I have filled the fb_info, var and fix Structs!
But there was the problem with the resolution!
I have found out that the problem is the videomode!
In modedb there is unfortunately no 800x480 Videomode, and I have tried my
own 800x480 Struct, but the Kernel does`t want my settings (I tried to
change an 800x600 to 800x480 only by changing yres to 480).
Can someone tell me please a working fb_videomode struct for 800x480?
The syncs are setted up by U-Boot .

Thank you very much
-- 
View this message in context: http://www.nabble.com/Videomode-800x480-tp18470632p18470632.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.

Re: Videomode 800x480

From: Anatolij Gustschin <agust@denx.de>
Date: 2008-07-15 18:30:24 

Hello,

Alex_SYS wrote:
Hello, I have the problem that I need a Framebuffer resolution 800x480!
Since now I have filled the fb_info, var and fix Structs!
But there was the problem with the resolution!
I have found out that the problem is the videomode!
In modedb there is unfortunately no 800x480 Videomode, and I have tried my
own 800x480 Struct, but the Kernel does`t want my settings (I tried to
change an 800x600 to 800x480 only by changing yres to 480).
Can someone tell me please a working fb_videomode struct for 800x480?
Values for 800x480 fb_videomode depend on the TFT-panel that
you are using. Without the spec of this panel it is hard to guess.
It is also hard to guess the value for .pixclock as we do not know
if internal or external clock is used as the source for display
reference clock. What is the value of GDC DCM0 register (at
offset 0x1fd0000 or 0x1fd0100 from the GDC base)?

Try something like this:
.xres = 800
.yres = 480
.pixclock = 40000
.left_margin = 86
.right_margin = 42
.upper_margin = 33
.lower_margin = 10
.hsync_len = 128
.vsync_len = 2

The syncs are setted up by U-Boot .
then you probably should retrieve proper values for fb_videomode
from display controller registers set up by U-Boot. If you do not
have the spec for your panel, it is the way to go. Consult the
GDC manual (Display control registers section) and
Documentation/fb/framebuffer.txt in the linux source tree.

Best regards,
Anatolij

Re: Videomode 800x480

From: Alex_SYS <hidden>
Date: 2008-07-16 08:50:51 


Hello,

Alex_SYS wrote:
Hello, I have the problem that I need a Framebuffer resolution 800x480!
Since now I have filled the fb_info, var and fix Structs!
But there was the problem with the resolution!
I have found out that the problem is the videomode!
In modedb there is unfortunately no 800x480 Videomode, and I have tried my
own 800x480 Struct, but the Kernel does`t want my settings (I tried to
change an 800x600 to 800x480 only by changing yres to 480).
Can someone tell me please a working fb_videomode struct for 800x480?
Values for 800x480 fb_videomode depend on the TFT-panel that
you are using. Without the spec of this panel it is hard to guess.
It is also hard to guess the value for .pixclock as we do not know
if internal or external clock is used as the source for display
reference clock. What is the value of GDC DCM0 register (at
offset 0x1fd0000 or 0x1fd0100 from the GDC base)?

Try something like this:
.xres = 800
.yres = 480
.pixclock = 40000
.left_margin = 86
.right_margin = 42
.upper_margin = 33
.lower_margin = 10
.hsync_len = 128
.vsync_len = 2

The syncs are setted up by U-Boot .
then you probably should retrieve proper values for fb_videomode
from display controller registers set up by U-Boot. If you do not
have the spec for your panel, it is the way to go. Consult the
GDC manual (Display control registers section) and
Documentation/fb/framebuffer.txt in the linux source tree.
Hello, the physical settings for sync are made by U-Boot and working!
But in Lunux when I use 800x480, the screen is well, but the Kernel crashes
at Bootup!
Using 800x600 works!
Now I need only "Dummy" settings, that I can tell Linux I would like 800x480
and the Kernel doesn`t crash!
I don`t know exactly why the Kernel crashes, I know only that the modedB
800x600 and so on work!
I will try your settings immediately!
Thanks

Alex

Best regards,
Anatolij
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded


-- 
View this message in context: http://www.nabble.com/Videomode-800x480-tp18470632p18482586.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.





  

    
Re: Videomode 800x480

    

      From: Alex_SYS <hidden>

      Date: 2008-07-17 07:15:33 
    

  

  

Alex_SYS wrote:
=20
<Here is the Kernel Bootup message that it gives when it crashes!
=20
U-Boot 1.2.0-mpc5200b-tiny-3 (Dec 11 2007 - 11:25:01)
=20
CPU:   MPC5200 v2.2, Core v1.4 at 399.999 MHz
       Bus 133 MHz, IPB 133 MHz, PCI 33 MHz
Board: phyCORE-MPC5200B-tiny
I2C:   ready
DRAM:  64 MB
SP:    0x03f73768
FLASH: 16 MB
Using pcm030 machine description
Linux version 2.6.23.1-rt5-pcm030-1trunk (aschmid@LINUX) (gcc version
4.1.2) #39
4 PREEMPT RT Tue Dec 11 17:58:48 CET 2007
Zone PFN ranges:
  DMA             0 ->    16384
  Normal      16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists in Zone order.  Total pages: 16256
Kernel command line: video=3D0x0-16@60 , console=3DttyPSC0,115200
mtdparts=3Dphysmap-f
lash.0:256k(ubootl),1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree=
),-(spa
quoted hunk
ce) rw root=3D/dev/mtdblock2 rootfstype=3Djffs2
WARNING: experimental RCU implementation.
MPC52xx PIC is up and running!
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x25
console [ttyPSC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61960k/65536k available (2624k kernel code, 3508k reserved, 144k
data, 1
06k bss, 124k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
DMA: MPC52xx BestComm driver
DMA: MPC52xx BestComm engine @f0001200 ok !
Generic PHY: Registered new driver
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 4, 73728 bytes)
TCP bind hash table entries: 2048 (order: 3, 57344 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
JFFS2 version 2.2. (NAND) =C3=82=C2=A9 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
No Options from U-Boot
Lime Driver PROBE
No Mode
Name des Strings 0x0-16@60 with L=C3=83=C2=A4nge 9
Schleife mode Options
Schleife @
Schleife -
Schleife x
DONE vor CVT xres=3D 0 , yres=3D0 , cvt=3D
0******************************************
************CVT Mode: Trying specified video mode 0x0
Trying mode 800x480-16@60 800x600-16@20
Error=3D
0********************************************************************Tryi
ng mode noname 640x400-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 640x480-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 800x600-16@56
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@87
Error=3D
0********************************************************************Tryi
ng mode noname 640x400-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 640x480-16@72
Error=3D
0********************************************************************Tryi
ng mode noname 640x480-16@75
Error=3D
0********************************************************************Tryi
ng mode noname 800x600-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 640x480-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@69
Error=3D
0********************************************************************Tryi
ng mode noname 800x600-16@72
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 640x480-16@100
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 800x600-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@87
Error=3D
0********************************************************************Tryi
ng mode noname 800x600-16@100
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@76
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@61
Error=3D
0********************************************************************Tryi
ng mode noname 1400x1050-16@68
Error=3D
0********************************************************************Tryi
ng mode noname 1400x1050-16@75
Error=3D
0********************************************************************Tryi
ng mode noname 1400x1050-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@78
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 1600x1200-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@84
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@74
Error=3D
0********************************************************************Tryi
ng mode noname 1024x768-16@100
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@76
Error=3D
0********************************************************************Tryi
ng mode noname 1600x1200-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 1152x864-16@100
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 1600x1200-16@75
Error=3D
0********************************************************************Tryi
ng mode noname 1680x1050-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 1600x1200-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 1280x1024-16@100
Error=3D
0********************************************************************Tryi
ng mode noname 1800x1440-16@64
Error=3D
0********************************************************************Tryi
ng mode noname 1800x1440-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 512x384-16@78
Error=3D
0********************************************************************Tryi
ng mode noname 512x384-16@85
Error=3D
0********************************************************************Tryi
ng mode noname 320x200-16@70
Error=3D
0********************************************************************Tryi
ng mode noname 320x240-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 320x240-16@72
Error=3D
0********************************************************************Tryi
ng mode noname 400x300-16@56
Error=3D
0********************************************************************Tryi
ng mode noname 400x300-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 400x300-16@72
Error=3D
0********************************************************************Tryi
ng mode noname 480x300-16@56
Error=3D
0********************************************************************Tryi
ng mode noname 480x300-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 480x300-16@63
Error=3D
0********************************************************************Tryi
ng mode noname 480x300-16@72
Error=3D
0********************************************************************Tryi
ng mode noname 1920x1200-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 1152x768-16@60
Error=3D
0********************************************************************Tryi
ng mode noname 1366x768-16@60
Error=3D
0********************************************************************Tryi
ng default video mode
Trying mode noname 800x480-16@60
Error=3D
0********************************************************************Tryi
ng default mode
Console: switching to colour frame buffer device 114x34
stopped custom tracer.
Oops: Exception in kernel mode, sig: 4 [#1]
PREEMPT pcm030
Modules linked in:
NIP: 00000900 LR: c011d94c CTR: c011daf4
REGS: c3fe7a30 TRAP: 0700   Not tainted  (2.6.23.1-rt5-pcm030-1trunk)
MSR: 00081000 <ME>  CR: 42042022  XER: 00000000
TASK =3D c3fe5c00[1] 'swapper' THREAD: c3fe6000
GPR00: ffffffff c3fe7ae0 c3fe5c00 c5128bfc 00000000 00010001 00000020
00000020
GPR08: 00000000 00010001 ffffffff 00000020 c3f5f800 fffffffb 03fcb000
ffffffff
GPR16: 00000001 00000000 c3fe7f78 c024a748 00000000 00000000 00000002
000001e0
GPR24: 00010001 c011daf4 00000020 c3f5f800 c5128bfc 00000000 00000005
000001b0
NIP [00000900] 0x900
LR [c011d94c] cfb_fillrect+0x144/0x2ec
Call Trace:
[c3fe7ae0] [c00fd90c] number+0x354/0x374 (unreliable)
[c3fe7b20] [c011c9c4] bit_clear_margins+0x100/0x104
[c3fe7b60] [c0116254] fbcon_clear_margins+0x7c/0x80
[c3fe7b70] [c011ba34] fbcon_switch+0x45c/0x630
[c3fe7c40] [c01350cc] redraw_screen+0x158/0x200
[c3fe7c60] [c0137878] bind_con_driver+0x2ec/0x428
[c3fe7ca0] [c01379f4] take_over_console+0x40/0x58
[c3fe7cc0] [c01199d0] fbcon_takeover+0x88/0xf8
[c3fe7cd0] [c011a694] fbcon_event_notify+0x8e4/0x908
[c3fe7da0] [c002e5a4] notifier_call_chain+0x60/0xb0
[c3fe7dc0] [c002f2bc] __blocking_notifier_call_chain+0x50/0x74
[c3fe7de0] [c011165c] fb_notifier_call_chain+0x24/0x34
[c3fe7df0] [c0112600] register_framebuffer+0x120/0x1d0
[c3fe7e50] [c0283380] vfb_probe+0x164/0x220
[c3fe7e70] [c0142284] platform_drv_probe+0x20/0x30
[c3fe7e80] [c01408e0] driver_probe_device+0xb8/0x1ec
[c3fe7ea0] [c0140a98] __driver_attach+0x84/0x88
[c3fe7ec0] [c013fbbc] bus_for_each_dev+0x58/0x94
[c3fe7ef0] [c01406f0] driver_attach+0x24/0x34
[c3fe7f00] [c0140018] bus_add_driver+0x98/0x1d8
[c3fe7f20] [c0140c40] driver_register+0x58/0xa0
[c3fe7f30] [c0142618] platform_driver_register+0x98/0xa8
[c3fe7f40] [c0283534] vfb_init+0xf8/0x120
[c3fe7f70] [c02711c4] kernel_init+0xa8/0x2bc
[c3fe7ff0] [c000fd2c] kernel_thread+0x44/0x60
Instruction dump:
Unable to handle kernel paging request for data at address 0xffff83bc
Faulting instruction address: 0xc00fd970
Oops: Kernel access of bad area, sig: 11 [#2]
PREEMPT pcm030
Modules linked in:
NIP: c00fd970 LR: c00fe29c CTR: 00000000
REGS: c3fe7790 TRAP: 0300   Not tainted  (2.6.23.1-rt5-pcm030-1trunk)
MSR: 00001032 <ME,IR,DR>  CR: 28044088  XER: 00000000
DAR: ffff83bc, DSISR: 20000000
TASK =3D c3fe5c00[1] 'swapper' THREAD: c3fe6000
GPR00: c00fe29c c3fe7840 c3fe5c00 00000000 00000400 ffff83bc c3fe78f8
00004000
GPR08: 00000000 00000002 ffff83bc c0296cc8 28042088 fffffffb 03fcb000
ffffffff
GPR16: 00000001 00000000 c3fe7f78 c024a748 00000000 00000000 c0290000
c0290000
GPR24: 00001032 c02bd934 c3fe78f8 c0250000 ffff83bc c02c0000 c02bdd34
c02bd934
NIP [c00fd970] vsnprintf+0x44/0x80c
LR [c00fe29c] vscnprintf+0x18/0x1ac
Call Trace:
[c3fe7840] [c0045948] rt_down_trylock+0x20/0x70 (unreliable)
[c3fe7870] [c00fe29c] vscnprintf+0x18/0x1ac
[c3fe7880] [c001fb88] vprintk+0x94/0x3c4
[c3fe78f0] [c001ff08] printk+0x50/0x60
[c3fe7930] [c0008890] show_regs+0x2c4/0x2e8
[c3fe7960] [c000d3bc] die+0xe8/0x198
[c3fe7980] [c000d5e8] _exception+0x38/0x104
[c3fe7a20] [c000f534] ret_from_except_full+0x0/0x4c
--- Exception: 700 at 0x900
    LR =3D cfb_fillrect+0x144/0x2ec
[c3fe7ae0] [c00fd90c] number+0x354/0x374 (unreliable)
[c3fe7b20] [c011c9c4] bit_clear_margins+0x100/0x104
[c3fe7b60] [c0116254] fbcon_clear_margins+0x7c/0x80
[c3fe7b70] [c011ba34] fbcon_switch+0x45c/0x630
[c3fe7c40] [c01350cc] redraw_screen+0x158/0x200
[c3fe7c60] [c0137878] bind_con_driver+0x2ec/0x428
[c3fe7ca0] [c01379f4] take_over_console+0x40/0x58
[c3fe7cc0] [c01199d0] fbcon_takeover+0x88/0xf8
[c3fe7cd0] [c011a694] fbcon_event_notify+0x8e4/0x908
[c3fe7da0] [c002e5a4] notifier_call_chain+0x60/0xb0
[c3fe7dc0] [c002f2bc] __blocking_notifier_call_chain+0x50/0x74
[c3fe7de0] [c011165c] fb_notifier_call_chain+0x24/0x34
[c3fe7df0] [c0112600] register_framebuffer+0x120/0x1d0
[c3fe7e50] [c0283380] vfb_probe+0x164/0x220
[c3fe7e70] [c0142284] platform_drv_probe+0x20/0x30
[c3fe7e80] [c01408e0] driver_probe_device+0xb8/0x1ec
[c3fe7ea0] [c0140a98] __driver_attach+0x84/0x88
[c3fe7ec0] [c013fbbc] bus_for_each_dev+0x58/0x94
[c3fe7ef0] [c01406f0] driver_attach+0x24/0x34
[c3fe7f00] [c0140018] bus_add_driver+0x98/0x1d8
[c3fe7f20] [c0140c40] driver_register+0x58/0xa0
[c3fe7f30] [c0142618] platform_driver_register+0x98/0xa8
[c3fe7f40] [c0283534] vfb_init+0xf8/0x120
[c3fe7f70] [c02711c4] kernel_init+0xa8/0x2bc
[c3fe7ff0] [c000fd2c] kernel_thread+0x44/0x60
Instruction dump:
7c791b78 7cda3378 90010034 91810010 90a10008 419007bc 7fc32214 7f83f040
419d0260 81410008 7f3fcb78 38600000 <880a0000> 2f800000 419e0044 7f3fcb78
Kernel panic - not syncing: Attempted to kill init!
Call Trace:
[c3fe7690] [c0007dfc] show_stack+0x3c/0x194 (unreliable)
[c3fe76c0] [c001f004] panic+0x9c/0x174
[c3fe7710] [c0023214] do_exit+0x6ec/0x884
[c3fe7750] [c000d46c] kernel_bad_stack+0x0/0x4c
[c3fe7770] [c00120ac] bad_page_fault+0x90/0xd8
[c3fe7780] [c000f388] handle_page_fault+0x7c/0x80
--- Exception: 300 at vsnprintf+0x44/0x80c
    LR =3D vscnprintf+0x18/0x1ac
[c3fe7840] [c0045948] rt_down_trylock+0x20/0x70 (unreliable)
[c3fe7870] [c00fe29c] vscnprintf+0x18/0x1ac
[c3fe7880] [c001fb88] vprintk+0x94/0x3c4
[c3fe78f0] [c001ff08] printk+0x50/0x60
[c3fe7930] [c0008890] show_regs+0x2c4/0x2e8
[c3fe7960] [c000d3bc] die+0xe8/0x198
[c3fe7980] [c000d5e8] _exception+0x38/0x104
[c3fe7a20] [c000f534] ret_from_except_full+0x0/0x4c
--- Exception: 700 at 0x900
    LR =3D cfb_fillrect+0x144/0x2ec
[c3fe7ae0] [c00fd90c] number+0x354/0x374 (unreliable)
[c3fe7b20] [c011c9c4] bit_clear_margins+0x100/0x104
[c3fe7b60] [c0116254] fbcon_clear_margins+0x7c/0x80
[c3fe7b70] [c011ba34] fbcon_switch+0x45c/0x630
[c3fe7c40] [c01350cc] redraw_screen+0x158/0x200
[c3fe7c60] [c0137878] bind_con_driver+0x2ec/0x428
[c3fe7ca0] [c01379f4] take_over_console+0x40/0x58
[c3fe7cc0] [c01199d0] fbcon_takeover+0x88/0xf8
[c3fe7cd0] [c011a694] fbcon_event_notify+0x8e4/0x908
[c3fe7da0] [c002e5a4] notifier_call_chain+0x60/0xb0
[c3fe7dc0] [c002f2bc] __blocking_notifier_call_chain+0x50/0x74
[c3fe7de0] [c011165c] fb_notifier_call_chain+0x24/0x34
[c3fe7df0] [c0112600] register_framebuffer+0x120/0x1d0
[c3fe7e50] [c0283380] vfb_probe+0x164/0x220
[c3fe7e70] [c0142284] platform_drv_probe+0x20/0x30
[c3fe7e80] [c01408e0] driver_probe_device+0xb8/0x1ec
[c3fe7ea0] [c0140a98] __driver_attach+0x84/0x88
[c3fe7ec0] [c013fbbc] bus_for_each_dev+0x58/0x94
[c3fe7ef0] [c01406f0] driver_attach+0x24/0x34
[c3fe7f00] [c0140018] bus_add_driver+0x98/0x1d8
[c3fe7f20] [c0140c40] driver_register+0x58/0xa0
[c3fe7f30] [c0142618] platform_driver_register+0x98/0xa8
[c3fe7f40] [c0283534] vfb_init+0xf8/0x120
[c3fe7f70] [c02711c4] kernel_init+0xa8/0x2bc
[c3fe7ff0] [c000fd2c] kernel_thread+0x44/0x60
Rebooting in 180 seconds..
=20
Hello,
=20
Alex_SYS wrote:
quoted
Hello, I have the problem that I need a Framebuffer resolution 800x480!
Since now I have filled the fb_info, var and fix Structs!
But there was the problem with the resolution!
I have found out that the problem is the videomode!
In modedb there is unfortunately no 800x480 Videomode, and I have tried
my
own 800x480 Struct, but the Kernel does`t want my settings (I tried to
change an 800x600 to 800x480 only by changing yres to 480).
Can someone tell me please a working fb_videomode struct for 800x480?
=20
Values for 800x480 fb_videomode depend on the TFT-panel that
you are using. Without the spec of this panel it is hard to guess.
It is also hard to guess the value for .pixclock as we do not know
if internal or external clock is used as the source for display
reference clock. What is the value of GDC DCM0 register (at
offset 0x1fd0000 or 0x1fd0100 from the GDC base)?
=20
Try something like this:
.xres =3D 800
.yres =3D 480
.pixclock =3D 40000
.left_margin =3D 86
.right_margin =3D 42
.upper_margin =3D 33
.lower_margin =3D 10
.hsync_len =3D 128
.vsync_len =3D 2
=20
quoted
The syncs are setted up by U-Boot .
=20
quoted
then you probably should retrieve proper values for fb_videomode
from display controller registers set up by U-Boot. If you do not
have the spec for your panel, it is the way to go. Consult the
GDC manual (Display control registers section) and
Documentation/fb/framebuffer.txt in the linux source tree.
=20
Hello, the physical settings for sync are made by U-Boot and working!
But in Lunux when I use 800x480, the screen is well, but the Kernel
crashes at Bootup!
Using 800x600 works!
Now I need only "Dummy" settings, that I can tell Linux I would like
800x480 and the Kernel doesn`t crash!
I don`t know exactly why the Kernel crashes, I know only that the modedB
800x600 and so on work!
I will try your settings immediately!
Thanks
=20
Alex
=20
Best regards,
Anatolij
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
=20
=20
--=20
View this message in context: http://www.nabble.com/Videomode-800x480-tp184=
70632p18502863.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.





  

    
Re: Videomode 800x480

    

      From: Anatolij Gustschin <agust@denx.de>

      Date: 2008-07-17 11:44:56 
    

  

  
Alex_SYS wrote:
Alex_SYS wrote:
quoted
<Here is the Kernel Bootup message that it gives when it crashes!

U-Boot 1.2.0-mpc5200b-tiny-3 (Dec 11 2007 - 11:25:01)

CPU:   MPC5200 v2.2, Core v1.4 at 399.999 MHz
       Bus 133 MHz, IPB 133 MHz, PCI 33 MHz
Board: phyCORE-MPC5200B-tiny
I2C:   ready
DRAM:  64 MB
SP:    0x03f73768
FLASH: 16 MB
Using pcm030 machine description
Linux version 2.6.23.1-rt5-pcm030-1trunk (aschmid@LINUX) (gcc version
4.1.2) #39
4 PREEMPT RT Tue Dec 11 17:58:48 CET 2007
Zone PFN ranges:
  DMA             0 ->    16384
  Normal      16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists in Zone order.  Total pages: 16256
Kernel command line: video=0x0-16@60 , console=ttyPSC0,115200
----------------------------->^^^^^^^^^
is this intentional?

quoted
mtdparts=physmap-f
lash.0:256k(ubootl),1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftree),-(spa
ce) rw root=/dev/mtdblock2 rootfstype=jffs2
WARNING: experimental RCU implementation.
MPC52xx PIC is up and running!
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x25
console [ttyPSC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61960k/65536k available (2624k kernel code, 3508k reserved, 144k
data, 1
06k bss, 124k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
DMA: MPC52xx BestComm driver
DMA: MPC52xx BestComm engine @f0001200 ok !
Generic PHY: Registered new driver
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 4, 73728 bytes)
TCP bind hash table entries: 2048 (order: 3, 57344 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
No Options from U-Boot
Lime Driver PROBE
No Mode
Name des Strings 0x0-16@60 with Länge 9
Schleife mode Options
Schleife @
Schleife -
Schleife x
DONE vor CVT xres= 0 , yres=0 , cvt=
0******************************************
************CVT Mode: Trying specified video mode 0x0
Trying mode 800x480-16@60 800x600-16@20
Error=
0********************************************************************Tryi
ng mode noname 640x400-16@70
Error=
0********************************************************************Tryi
ng mode noname 640x480-16@60
Error=
0********************************************************************Tryi
ng mode noname 800x600-16@56
What arguments do you pass to fb_find_mode() in the driver? Probing all of
these modes is not necessary.
 
<snip>
quoted
Error=
0********************************************************************Tryi
ng default video mode
Trying mode noname 800x480-16@60
Error=
0********************************************************************Tryi
ng default mode
Console: switching to colour frame buffer device 114x34
stopped custom tracer.
Oops: Exception in kernel mode, sig: 4 [#1]
PREEMPT pcm030
Modules linked in:
NIP: 00000900 LR: c011d94c CTR: c011daf4
REGS: c3fe7a30 TRAP: 0700   Not tainted  (2.6.23.1-rt5-pcm030-1trunk)
MSR: 00081000 <ME>  CR: 42042022  XER: 00000000
TASK = c3fe5c00[1] 'swapper' THREAD: c3fe6000
GPR00: ffffffff c3fe7ae0 c3fe5c00 c5128bfc 00000000 00010001 00000020
00000020
GPR08: 00000000 00010001 ffffffff 00000020 c3f5f800 fffffffb 03fcb000
ffffffff
GPR16: 00000001 00000000 c3fe7f78 c024a748 00000000 00000000 00000002
000001e0
GPR24: 00010001 c011daf4 00000020 c3f5f800 c5128bfc 00000000 00000005
000001b0
NIP [00000900] 0x900
Could you post your current vfb.c and .config file?

Best Regards,
Anatolij





  

    
Re: Videomode 800x480

    

      From: Alex_SYS <hidden>

      Date: 2008-07-17 12:11:14 
    

  

  
Hello, I`m doing video=3D0x0... to letFB_find_mode use my default video!
Yes I give you my vfb.c and .config! Thanks very much!
I found that only changing  the linelength, the visible resolution changes
too.
=20



Anatolij Gustschin wrote:
=20
Alex_SYS wrote:
quoted
=20
Alex_SYS wrote:
quoted
<Here is the Kernel Bootup message that it gives when it crashes!

U-Boot 1.2.0-mpc5200b-tiny-3 (Dec 11 2007 - 11:25:01)

CPU:   MPC5200 v2.2, Core v1.4 at 399.999 MHz
       Bus 133 MHz, IPB 133 MHz, PCI 33 MHz
Board: phyCORE-MPC5200B-tiny
I2C:   ready
DRAM:  64 MB
SP:    0x03f73768
FLASH: 16 MB
Using pcm030 machine description
Linux version 2.6.23.1-rt5-pcm030-1trunk (aschmid@LINUX) (gcc version
4.1.2) #39
4 PREEMPT RT Tue Dec 11 17:58:48 CET 2007
Zone PFN ranges:
  DMA             0 ->    16384
  Normal      16384 ->    16384
Movable zone start PFN for each node
early_node_map[1] active PFN ranges
    0:        0 ->    16384
Real-Time Preemption Support (C) 2004-2007 Ingo Molnar
Built 1 zonelists in Zone order.  Total pages: 16256
Kernel command line: video=3D0x0-16@60 , console=3DttyPSC0,115200
----------------------------->^^^^^^^^^
is this intentional?
=20
quoted
quoted
mtdparts=3Dphysmap-f
lash.0:256k(ubootl),1792k(kernel),13312k(jffs2),256k(uboot)ro,256k(oftr=
ee),-(spa
quoted
quoted
ce) rw root=3D/dev/mtdblock2 rootfstype=3Djffs2
WARNING: experimental RCU implementation.
MPC52xx PIC is up and running!
PID hash table entries: 256 (order: 8, 1024 bytes)
Console: colour dummy device 80x25
console [ttyPSC0] enabled
Dentry cache hash table entries: 8192 (order: 3, 32768 bytes)
Inode-cache hash table entries: 4096 (order: 2, 16384 bytes)
Memory: 61960k/65536k available (2624k kernel code, 3508k reserved, 144=
k
quoted
quoted
data, 1
06k bss, 124k init)
Mount-cache hash table entries: 512
NET: Registered protocol family 16
PCI: Probing PCI hardware
DMA: MPC52xx BestComm driver
DMA: MPC52xx BestComm engine @f0001200 ok !
Generic PHY: Registered new driver
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 2048 (order: 4, 73728 bytes)
TCP bind hash table entries: 2048 (order: 3, 57344 bytes)
TCP: Hash tables configured (established 2048 bind 2048)
TCP reno registered
JFFS2 version 2.2. (NAND) =C3=82=C2=A9 2001-2006 Red Hat, Inc.
io scheduler noop registered (default)
No Options from U-Boot
Lime Driver PROBE
No Mode
Name des Strings 0x0-16@60 with L=C3=83=C2=A4nge 9
Schleife mode Options
Schleife @
Schleife -
Schleife x
DONE vor CVT xres=3D 0 , yres=3D0 , cvt=3D
0******************************************
************CVT Mode: Trying specified video mode 0x0
Trying mode 800x480-16@60 800x600-16@20
Error=3D
0********************************************************************Tr=
yi
quoted
quoted
ng mode noname 640x400-16@70
Error=3D
0********************************************************************Tr=
yi
quoted
quoted
ng mode noname 640x480-16@60
Error=3D
0********************************************************************Tr=
yi
quoted
quoted
ng mode noname 800x600-16@56
=20
What arguments do you pass to fb_find_mode() in the driver? Probing all o=
f
these modes is not necessary.
=20
<snip>
quoted
quoted
Error=3D
0********************************************************************Tr=
yi
quoted
quoted
ng default video mode
Trying mode noname 800x480-16@60
Error=3D
0********************************************************************Tr=
yi
quoted
quoted
ng default mode
Console: switching to colour frame buffer device 114x34
stopped custom tracer.
Oops: Exception in kernel mode, sig: 4 [#1]
PREEMPT pcm030
Modules linked in:
NIP: 00000900 LR: c011d94c CTR: c011daf4
REGS: c3fe7a30 TRAP: 0700   Not tainted  (2.6.23.1-rt5-pcm030-1trunk)
MSR: 00081000 <ME>  CR: 42042022  XER: 00000000
TASK =3D c3fe5c00[1] 'swapper' THREAD: c3fe6000
GPR00: ffffffff c3fe7ae0 c3fe5c00 c5128bfc 00000000 00010001 00000020
00000020
GPR08: 00000000 00010001 ffffffff 00000020 c3f5f800 fffffffb 03fcb000
ffffffff
GPR16: 00000001 00000000 c3fe7f78 c024a748 00000000 00000000 00000002
000001e0
GPR24: 00010001 c011daf4 00000020 c3f5f800 c5128bfc 00000000 00000005
000001b0
NIP [00000900] 0x900
=20
Could you post your current vfb.c and .config file?
=20
Best Regards,
Anatolij
=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
=20
http://www.nabble.com/file/p18506984/vfb.c vfb.c=20
http://www.nabble.com/file/p18506984/.config .config=20
--=20
View this message in context: http://www.nabble.com/Videomode-800x480-tp184=
70632p18506984.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.





  

    
Re: Videomode 800x480

    

      From: Detlev Zundel <hidden>

      Date: 2008-07-17 15:27:59 
    

  

  
Hi Alex,

Hello, the physical settings for sync are made by U-Boot and working!
But in Lunux when I use 800x480, the screen is well, but the Kernel crashes
at Bootup!
Using 800x600 works!
Now I need only "Dummy" settings, that I can tell Linux I would like 800x480
and the Kernel doesn`t crash!
I don`t know exactly why the Kernel crashes, I know only that the modedB
800x600 and so on work!
I will try your settings immediately!
Your keymap seems to be broken.  Try to include this in your ~/.Xmodmap
file:

keycode  10 = 1 period

Cheers
  Detlev

-- 
error compiling committee.c: too many arguments to function





  

    
Re: Videomode 800x480

    

      From: Alex_SYS <hidden>

      Date: 2008-07-18 08:52:38 
    

  

  
Hello, I`m on the embedded version, and have madee in qconf "framebuffer
console" with fbdev!
I`m sorry, but I don`t have the file "XModeMap" in my target! I have no X
Running!



Detlev Zundel wrote:
Hi Alex,

quoted
Hello, the physical settings for sync are made by U-Boot and working!
But in Lunux when I use 800x480, the screen is well, but the Kernel
crashes
at Bootup!
Using 800x600 works!
Now I need only "Dummy" settings, that I can tell Linux I would like
800x480
and the Kernel doesn`t crash!
I don`t know exactly why the Kernel crashes, I know only that the modedB
800x600 and so on work!
I will try your settings immediately!
Your keymap seems to be broken.  Try to include this in your ~/.Xmodmap
file:

keycode  10 = 1 period

Cheers
  Detlev

-- 
error compiling committee.c: too many arguments to function

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
View this message in context: http://www.nabble.com/Videomode-800x480-tp18470632p18525123.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.




    
  

  
    

      

        Keyboard shortcuts
      

      

        
          
hback out one level

          
jnext message in thread

          
kprevious message in thread

          
ldrill in

          
Escclose help / fold thread tree

          
?toggle this help