From: Ben Dooks <ben-linux@fluff.org> Date: 2008-07-31 19:03:21
On Thu, Jul 31, 2008 at 01:53:45PM -0500, Kumar Gala wrote:
I'm getting the following badness with top of tree on a embedded
PowerPC w/a ULI 1575 bridge (M5229 IDE):
02:1f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c8)
If you need more info let me know.
- k
ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl
SATA mode
ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
------------[ cut here ]------------
Badness at c021e700 [verbose debug info unavailable]
it would be helpful to compile a kernel with verbose fault information
turned on.
NIP: c021e700 LR: c021e6e8 CTR: c022ce90
REGS: ef82bca0 TRAP: 0700 Not tainted (2.6.27-rc1-00495-g33bd9fe-
dirty)
MSR: 00029032 <EE,ME,IR,DR> CR: 22044022 XER: 20000000
TASK = ef830000[1] 'swapper' THREAD: ef82a000 CPU: 1
GPR00: 00000001 ef82bd50 ef830000 00000000 00009032 00000000 ef0b64fc
00000000
GPR08: ef937c10 c022f93f efbfc8e0 ef900b60 22044028 fffdd3ff 0ffe8700
c044c17c
GPR16: c04d52ec ef82f458 ef82f4f4 ef82f4f4 c044c234 c044c5d8 c044c5d8
c044c220
GPR24: c044c218 c04d52f0 00000080 c022f940 00000000 c044c244 efbec490
00000000
NIP [c021e700] ata_host_activate+0x40/0x10c
LR [c021e6e8] ata_host_activate+0x28/0x10c
Call Trace:
[ef82bd50] [c021e6e8] ata_host_activate+0x28/0x10c (unreliable)
[ef82bd80] [c022f48c] ahci_init_one+0x8b4/0xd68
[ef82be30] [c01b69c0] pci_device_probe+0x84/0xa8
[ef82be50] [c01e5438] driver_probe_device+0xb4/0x1e8
[ef82be70] [c01e55f0] __driver_attach+0x84/0x88
[ef82be90] [c01e4ba0] bus_for_each_dev+0x5c/0xa4
[ef82bec0] [c01e5254] driver_attach+0x24/0x34
[ef82bed0] [c01e44b8] bus_add_driver+0x1d8/0x24c
[ef82bef0] [c01e5810] driver_register+0x70/0x160
[ef82bf10] [c01b6c54] __pci_register_driver+0x64/0xc4
[ef82bf30] [c04aaa60] ahci_init+0x28/0x38
[ef82bf40] [c048717c] do_one_initcall+0x38/0x1ac
[ef82bfb0] [c04874e0] kernel_init+0x1f0/0x1fc
[ef82bff0] [c0013b04] kernel_thread+0x44/0x60
Instruction dump:
7cbb2b78 90010034 7cda3378 7cf93b78 7c7e1b78 4bff9dbd 7c7f1b79 408200c8
2f9c0000 409e002c 313bffff 7c09d910 <0f000000> 80010034 7fc3f378
7f24cb78
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006100
ata2: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006180
ata3: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006200
ata4: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006280
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : pata_ali
scsi5 : pata_ali
ata5: PATA max UDMA/133 cmd 0x1200 ctl 0x1208 bmdma 0x1220
ata6: PATA max UDMA/133 cmd 0x1210 ctl 0x1218 bmdma 0x1228
Looks like you're running into the same problem as I did, with the
fact that the M5529 is in native mode, but doesn't have any IRQ
available. Do you know if the bridge chip in it is in routes the
IRQs internally?
ata5.00: ATAPI: TSSTcorp CDW/DVD SH-M522C, TS06, max UDMA/33
ata5.00: WARNING: ATAPI DMA disabled for reliablity issues. It can be
enabled
ata5.00: WARNING: via pata_ali.atapi_dma modparam or corresponding
sysfs node.
ata5.00: configured for UDMA/33
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for UDMA/33
ata5: EH complete
ata5.00: limiting speed to UDMA/25:PIO4
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for UDMA/25
ata5: EH complete
ata5.00: limiting speed to PIO4
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO4
ata5: EH complete
ata5.00: limiting speed to PIO3
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO3
ata5: EH complete
ata5.00: limiting speed to PIO0
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
ata5.00: cmd a0/00:00:00:24:00/00:00:00:00:00/a0 tag 0 pio 36 in
cdb 12 00 00 00 24 00 00 00 00 00 00 00 00 00 00 00
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
ata5.00: status: { DRDY }
ata5: soft resetting link
ata5.00: configured for PIO0
ata5: EH complete
ata5: WARNING: synchronous SCSI scan failed without making any progress,
switching to async
--
To unsubscribe from this list: send the line "unsubscribe linux-ide" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
--
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
From: Kumar Gala <hidden> Date: 2008-07-31 20:25:28
On Jul 31, 2008, at 2:02 PM, Ben Dooks wrote:
On Thu, Jul 31, 2008 at 01:53:45PM -0500, Kumar Gala wrote:
quoted
I'm getting the following badness with top of tree on a embedded
PowerPC w/a ULI 1575 bridge (M5229 IDE):
02:1f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev
c8)
If you need more info let me know.
- k
ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl
SATA mode
ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
------------[ cut here ]------------
Badness at c021e700 [verbose debug info unavailable]
it would be helpful to compile a kernel with verbose fault information
turned on.
Doesn't seem to provide too much more info on ppc. just says the file/
line number of the badness.
quoted
NIP: c021e700 LR: c021e6e8 CTR: c022ce90
REGS: ef82bca0 TRAP: 0700 Not tainted (2.6.27-rc1-00495-g33bd9fe-
dirty)
MSR: 00029032 <EE,ME,IR,DR> CR: 22044022 XER: 20000000
TASK = ef830000[1] 'swapper' THREAD: ef82a000 CPU: 1
GPR00: 00000001 ef82bd50 ef830000 00000000 00009032 00000000 ef0b64fc
00000000
GPR08: ef937c10 c022f93f efbfc8e0 ef900b60 22044028 fffdd3ff 0ffe8700
c044c17c
GPR16: c04d52ec ef82f458 ef82f4f4 ef82f4f4 c044c234 c044c5d8 c044c5d8
c044c220
GPR24: c044c218 c04d52f0 00000080 c022f940 00000000 c044c244 efbec490
00000000
NIP [c021e700] ata_host_activate+0x40/0x10c
LR [c021e6e8] ata_host_activate+0x28/0x10c
Call Trace:
[ef82bd50] [c021e6e8] ata_host_activate+0x28/0x10c (unreliable)
[ef82bd80] [c022f48c] ahci_init_one+0x8b4/0xd68
[ef82be30] [c01b69c0] pci_device_probe+0x84/0xa8
[ef82be50] [c01e5438] driver_probe_device+0xb4/0x1e8
[ef82be70] [c01e55f0] __driver_attach+0x84/0x88
[ef82be90] [c01e4ba0] bus_for_each_dev+0x5c/0xa4
[ef82bec0] [c01e5254] driver_attach+0x24/0x34
[ef82bed0] [c01e44b8] bus_add_driver+0x1d8/0x24c
[ef82bef0] [c01e5810] driver_register+0x70/0x160
[ef82bf10] [c01b6c54] __pci_register_driver+0x64/0xc4
[ef82bf30] [c04aaa60] ahci_init+0x28/0x38
[ef82bf40] [c048717c] do_one_initcall+0x38/0x1ac
[ef82bfb0] [c04874e0] kernel_init+0x1f0/0x1fc
[ef82bff0] [c0013b04] kernel_thread+0x44/0x60
Instruction dump:
7cbb2b78 90010034 7cda3378 7cf93b78 7c7e1b78 4bff9dbd 7c7f1b79
408200c8
2f9c0000 409e002c 313bffff 7c09d910 <0f000000> 80010034 7fc3f378
7f24cb78
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006100
ata2: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006180
ata3: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006200
ata4: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006280
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
scsi4 : pata_ali
scsi5 : pata_ali
ata5: PATA max UDMA/133 cmd 0x1200 ctl 0x1208 bmdma 0x1220
ata6: PATA max UDMA/133 cmd 0x1210 ctl 0x1218 bmdma 0x1228
Looks like you're running into the same problem as I did, with the
fact that the M5529 is in native mode, but doesn't have any IRQ
available. Do you know if the bridge chip in it is in routes the
IRQs internally?
From: Anton Vorontsov <hidden> Date: 2008-07-31 21:04:25
On Thu, Jul 31, 2008 at 01:53:45PM -0500, Kumar Gala wrote:
I'm getting the following badness with top of tree on a embedded PowerPC
w/a ULI 1575 bridge (M5229 IDE):
02:1f.0 IDE interface: Acer Laboratories Inc. [ALi] M5229 IDE (rev c8)
Just to be sure that I didn't break the ULi for your board, could
you try locally revert this patch:
commit 52ddd1cdc923802b224b15ba75000c6c5668227f
Author: Anton Vorontsov [off-list ref]
Date: Thu Jun 12 03:04:17 2008 +0400
powerpc/85xx/86xx: some refactoring for fsl_uli1575 code
And see if this helps?
If you need more info let me know.
- k
ahci 0000:02:1f.1: AHCI 0001.0000 32 slots 4 ports 3 Gbps 0xf impl SATA
mode
ahci 0000:02:1f.1: flags: ncq sntf ilck pm led clo pmp pio slum part
------------[ cut here ]------------
Badness at c021e700 [verbose debug info unavailable]
NIP: c021e700 LR: c021e6e8 CTR: c022ce90
REGS: ef82bca0 TRAP: 0700 Not tainted (2.6.27-rc1-00495-g33bd9fe-
dirty)
MSR: 00029032 <EE,ME,IR,DR> CR: 22044022 XER: 20000000
TASK = ef830000[1] 'swapper' THREAD: ef82a000 CPU: 1
GPR00: 00000001 ef82bd50 ef830000 00000000 00009032 00000000 ef0b64fc
00000000
GPR08: ef937c10 c022f93f efbfc8e0 ef900b60 22044028 fffdd3ff 0ffe8700
c044c17c
GPR16: c04d52ec ef82f458 ef82f4f4 ef82f4f4 c044c234 c044c5d8 c044c5d8
c044c220
GPR24: c044c218 c04d52f0 00000080 c022f940 00000000 c044c244 efbec490
00000000
NIP [c021e700] ata_host_activate+0x40/0x10c
LR [c021e6e8] ata_host_activate+0x28/0x10c
Call Trace:
[ef82bd50] [c021e6e8] ata_host_activate+0x28/0x10c (unreliable)
[ef82bd80] [c022f48c] ahci_init_one+0x8b4/0xd68
[ef82be30] [c01b69c0] pci_device_probe+0x84/0xa8
[ef82be50] [c01e5438] driver_probe_device+0xb4/0x1e8
[ef82be70] [c01e55f0] __driver_attach+0x84/0x88
[ef82be90] [c01e4ba0] bus_for_each_dev+0x5c/0xa4
[ef82bec0] [c01e5254] driver_attach+0x24/0x34
[ef82bed0] [c01e44b8] bus_add_driver+0x1d8/0x24c
[ef82bef0] [c01e5810] driver_register+0x70/0x160
[ef82bf10] [c01b6c54] __pci_register_driver+0x64/0xc4
[ef82bf30] [c04aaa60] ahci_init+0x28/0x38
[ef82bf40] [c048717c] do_one_initcall+0x38/0x1ac
[ef82bfb0] [c04874e0] kernel_init+0x1f0/0x1fc
[ef82bff0] [c0013b04] kernel_thread+0x44/0x60
Instruction dump:
7cbb2b78 90010034 7cda3378 7cf93b78 7c7e1b78 4bff9dbd 7c7f1b79 408200c8
2f9c0000 409e002c 313bffff 7c09d910 <0f000000> 80010034 7fc3f378
7f24cb78
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
ata1: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006100
ata2: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006180
ata3: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006200
ata4: SATA max UDMA/133 abar m1024@0x80006000 port 0x80006280
ata1: SATA link down (SStatus 0 SControl 300)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2.00: qc timeout (cmd 0xec)
ata2.00: failed to IDENTIFY (I/O error, err_mask=0x4)
ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
--
Anton Vorontsov
email: cbouatmailru@gmail.com
irc://irc.freenode.net/bd2
From: Kumar Gala <hidden> Date: 2008-07-31 21:59:00
I figured out the issue. Its related to the interrupt routing being
conveyed to the code from the device tree. We have a missing 'space'
causing issues.
- k
From: Ben Dooks <ben-linux@fluff.org> Date: 2008-08-01 10:44:17
On Thu, Jul 31, 2008 at 04:58:05PM -0500, Kumar Gala wrote:
I figured out the issue. Its related to the interrupt routing being
conveyed to the code from the device tree. We have a missing 'space'
causing issues.
out of interest, is the M5229 attached to a single IRQ in this device
or has the bridge been configured to route the IRQs from the IDE to
the same pin on the PIC?
--
Ben
Q: What's a light-year?
A: One-third less calories than a regular year.
From: Kumar Gala <hidden> Date: 2008-08-01 12:49:24
On Aug 1, 2008, at 5:43 AM, Ben Dooks wrote:
On Thu, Jul 31, 2008 at 04:58:05PM -0500, Kumar Gala wrote:
quoted
I figured out the issue. Its related to the interrupt routing being
conveyed to the code from the device tree. We have a missing 'space'
causing issues.
out of interest, is the M5229 attached to a single IRQ in this device
or has the bridge been configured to route the IRQs from the IDE to
the same pin on the PIC?
The bridge is routing interrupts via an i8259 to a single interrupt on
the OpenPIC (primary pic).
- k