MTD on Freescale 5200B - supported?

Hi all,

the subject says it all - does the Freescale 5200B (and the 5200 Lite board) support MTD for NAND flash chips (not cf cards connected to the ATA bus)?

Cheers, Albrecht

On Sat, May 17, 2008 at 11:17 AM, Albrecht Dre=DF [off-list ref]=
 wrote:

Hi all,



the subject says it all - does the Freescale 5200B (and the 5200 Lite boa=

rd)

support MTD for NAND flash chips (not cf cards connected to the ATA bus)?

The MPC5200 does not directly support NAND memory, but you should be
able to interface it to the local bus interface.  This is a useful
whitepaper:

http://www.freescale.com/files/32bit/doc/white_paper/NANDFLASHWP.pdf?fpsp=
=3D1&WT_TYPE=3DWhite%20Papers&WT_VENDOR=3DFREESCALE&WT_FILE_FORMAT=3Dpdf&WT=
_ASSET=3DDocumentation

Cheers,
g.

--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.

Am 17.05.08 21:31 schrieb(en) Grant Likely:

The MPC5200 does not directly support NAND memory, but you should be able to interface it to the local bus interface.  This is a useful whitepaper:

Yes, that information is useful, thanks!  However, actually the answer to my question is that there is no MTD/NAND support in recent Linux kernels, right?

Thanks, Albrecht.

On Sat, May 17, 2008 at 10:12:04PM +0200, Albrecht Dreß wrote:

Yes, that information is useful, thanks!  However, actually the answer to my
question is that there is no MTD/NAND support in recent Linux kernels, right?

Linux supports MTD.
Linux supports NAND.
Linux supports MPC5200B.
Linux does not support MTD+NAND+MPC5200B

It's just a matter of bringing things together on your MPC5200.

rsc
-- 
 Dipl.-Ing. Robert Schwebel | http://www.pengutronix.de
 Pengutronix - Linux Solutions for Science and Industry
   Handelsregister:  Amtsgericht Hildesheim, HRA 2686
     Hannoversche Str. 2, 31134 Hildesheim, Germany
   Phone: +49-5121-206917-0 |  Fax: +49-5121-206917-9