[PATCH] [POWERPC] booting-without-of: fix GPIO section mis-numbering
DORMANTno replies
From: Anton Vorontsov <hidden>
Date: 2008-05-23 12:14:19
Subsystem:
documentation, the rest · Maintainers:
Jonathan Corbet, Linus Torvalds
"Specifying GPIO information for devices" should be IX-th section, not VIII-th. Thanks to David Brownell for noticing. Signed-off-by: Anton Vorontsov <redacted> --- Documentation/powerpc/booting-without-of.txt | 6 +++--- 1 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1d2a772..0f83d43 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt@@ -88,7 +88,7 @@ Table of Contents 3) OpenPIC Interrupt Controllers 4) ISA Interrupt Controllers - VIII - Specifying GPIO information for devices + IX - Specifying GPIO information for devices 1) gpios property 2) gpio-controller nodes
@@ -3477,8 +3477,8 @@ encodings listed below: 2 = high to low edge sensitive type enabled 3 = low to high edge sensitive type enabled -VIII - Specifying GPIO information for devices -============================================== +IX - Specifying GPIO information for devices +============================================ 1) gpios property -----------------
--
1.5.5.1