[PATCH] 4xx: Fix PCI mem in rainier DTS

This fixes the PCI node in the Rainier to match the spec from AMCC.  A
similar fix was done for 440EPx, which shares the same values as 440GRx.

Signed-off-by: Josh Boyer <redacted>

---
 arch/powerpc/boot/dts/rainier.dts |    5 +++--
 1 file changed, 3 insertions(+), 2 deletions(-)

--- linux-2.6.orig/arch/powerpc/boot/dts/rainier.dts
+++ linux-2.6/arch/powerpc/boot/dts/rainier.dts

@@ -328,8 +328,9 @@
 			 * later cannot be changed. Chip supports a second
 			 * IO range but we don't use it for now
 			 */
-			ranges = <02000000 0 80000000 1 80000000 0 10000000
-				01000000 0 00000000 1 e8000000 0 00100000>;
+			ranges = <02000000 0 80000000 1 80000000 0 40000000
+				01000000 0 00000000 1 e8000000 0 00010000
+				01000000 0 00000000 1 e8800000 0 03800000>;
 
 			/* Inbound 2GB range starting at 0 */
 			dma-ranges = <42000000 0 0 0 0 0 80000000>;

On Thu, May 15, 2008 at 09:41:23AM -0500, Josh Boyer wrote:

This fixes the PCI node in the Rainier to match the spec from AMCC.  A
similar fix was done for 440EPx, which shares the same values as 440GRx.

This will conflict with the dts-v1 conversion patch.

-- 
David Gibson			| I'll have my music baroque, and my code
david AT gibson.dropbear.id.au	| minimalist, thank you.  NOT _the_ _other_
				| _way_ _around_!
http://www.ozlabs.org/~dgibson

On Fri, 16 May 2008 10:15:29 +1000
David Gibson [off-list ref] wrote:

On Thu, May 15, 2008 at 09:41:23AM -0500, Josh Boyer wrote:

quoted

This fixes the PCI node in the Rainier to match the spec from AMCC.  A
similar fix was done for 440EPx, which shares the same values as 440GRx.

This will conflict with the dts-v1 conversion patch.

I'm well aware of that.  It will be fixed up.  Thanks.

josh