# Re: powerpc port for sbc8260-based board problem

- From: Scott Wood \<hidden\>
- Date: 2008-05-07 19:33:16 
- List: linuxppc-dev
- Page: https://ratatoskr.run/linuxppc-dev/2008/05/9439854
- Thread: https://ratatoskr.run/linuxppc-dev/2008/05/9439833/t.md

```text
Sergej Stepanov wrote:
> Am Mittwoch, den 07.05.2008, 13:57 -0500 schrieb Scott Wood:
>> I'm not sure how it would make a difference -- the BRG should have already been set through the set_termios callback, which is called from uart_set_options.
>>
>> -Scott
> Yes, i thought it also, but i traced it for us for the uart console.
> The cpm_uart_set_termios(..) was not called.
> At which place should it be called?
> Is it uart_set_options(..)?

Yes, uart_set_options() calls port->ops->set_termios().

-Scott
```