linux @ xup

Hi

I already succeded in setting up a Linux for the ml310. I'm trying to do it for the XUP Board now. The Problem I have is, that
in every HowTo I read I should set at the EDK's software settings under Library/OS Parameters:
Set PLB_CLOCK_FREQ_HZ to the PLB speed (usually 100000000)

But I can't find where to set it. With the ml310 there was this option. I'm using the EDK Board Definition File (.xbd), Pcores & Drivers from Xilinx:
http://www.xilinx.com/univ/xupv2p.html
EDK Version 9.1 SP2

If I ignore it and build the BSP there comes out an xparameters_ml300.h file which I copy to my Kernel sources.
When I try to compile, I get errors that the PLB_CLOCK_FREQ_HZ isn't defined.
Can I just add it to the xparameters_ml300.h file file (which I rename "xparameters_xupv2p.h") by Hand?

Greez and thx
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! 
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114

Hi, 

You should set the Software/Software Platforms Settings/Os and Libraries/
UART16550 bus clock freq to the Bus Speed to 100000000 usually, this is the
OPB bus speed. And in Core_Clock_Frequency you insert the PLB bus speed.

You don't have to edit manually the file xparameters_ml300.h. 

If your are using Grant's kernel, from secretlab git, you should name the
file xparameters_ml300.h.
If your using the xilinx kernel you could change the name of the file and
use xparameters_xupv2p.h but you have to select this platform in the kernel
configuration...

I don't know if your asking for this, but I wish it could help.

Bye.


Joachim Meyer wrote:

Hi

I already succeded in setting up a Linux for the ml310. I'm trying to do
it for the XUP Board now. The Problem I have is, that
in every HowTo I read I should set at the EDK's software settings under
Library/OS Parameters:
Set PLB_CLOCK_FREQ_HZ to the PLB speed (usually 100000000)

But I can't find where to set it. With the ml310 there was this option.
I'm using the EDK Board Definition File (.xbd), Pcores & Drivers from
Xilinx:
http://www.xilinx.com/univ/xupv2p.html
EDK Version 9.1 SP2

If I ignore it and build the BSP there comes out an xparameters_ml300.h
file which I copy to my Kernel sources.
When I try to compile, I get errors that the PLB_CLOCK_FREQ_HZ isn't
defined.
Can I just add it to the xparameters_ml300.h file file (which I rename
"xparameters_xupv2p.h") by Hand?

Greez and thx
Joachim
_________________________________________________________________________
In 5 Schritten zur eigenen Homepage. Jetzt Domain sichern und gestalten! 
Nur 3,99 EUR/Monat! http://www.maildomain.web.de/?mc=021114

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

-- 
View this message in context: http://www.nabble.com/linux-%40-xup-tp15179005p15179875.html
Sent from the linuxppc-embedded mailing list archive at Nabble.com.