First, many many thanks to Grant. My VirtexII Demo Board ist running a
2.6. Linux :))
But now, i switched to a Virtex4-Board with Ethernet (Mini Module from
Avnet)
This will i used in my application, if i can handle it. :)
Linux is up and running, the ethernet is detected as eth0, link led is on
but, and thats the problem, speed negotiating das not work.
is this more a linux problem or hardware ???
Regards
Georg
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
Forschungszentrum Jülich GmbH
52425 Jülich
Sitz der Gesellschaft: Jülich
Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe
Vorstand: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv.
Vorsitzender)
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
schardt schrieb:
First, many many thanks to Grant. My VirtexII Demo Board ist running a
2.6. Linux :))
But now, i switched to a Virtex4-Board with Ethernet (Mini Module from
Avnet)
This will i used in my application, if i can handle it. :)
Linux is up and running, the ethernet is detected as eth0, link led is on
but, and thats the problem, speed negotiating das not work.
Check the PHY configuration (i.e. the bootstrap pins on the PHY).
And - if appropriate - read out the PHY configuration (MDIO) and see
if it's correct.
Regards,
--
Clemens Koller
__________________________________
R&D Imaging Devices
Anagramm GmbH
Rupert-Mayer-Straße 45/1
Linhof Werksgelände
D-81379 München
Tel.089-741518-50
Fax 089-741518-19
http://www.anagramm-technology.com
Ah, just found the problem in old postings
i've to use the 'a' Version of the IP-Core :)
Georg
Clemens Koller wrote:
schardt schrieb:
quoted
First, many many thanks to Grant. My VirtexII Demo Board ist running a
2.6. Linux :))
But now, i switched to a Virtex4-Board with Ethernet (Mini Module from
Avnet)
This will i used in my application, if i can handle it. :)
Linux is up and running, the ethernet is detected as eth0, link led
is on
but, and thats the problem, speed negotiating das not work.
Check the PHY configuration (i.e. the bootstrap pins on the PHY).
And - if appropriate - read out the PHY configuration (MDIO) and see
if it's correct.
Regards,
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------
Forschungszentrum Jülich GmbH
52425 Jülich
Sitz der Gesellschaft: Jülich
Eingetragen im Handelsregister des Amtsgerichts Düren Nr. HR B 3498
Vorsitzende des Aufsichtsrats: MinDirig'in Bärbel Brumme-Bothe
Vorstand: Prof. Dr. Achim Bachem (Vorsitzender), Dr. Ulrich Krafft (stellv.
Vorsitzender)
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------