[PATCH] atyfb: force 29MHz xtal on G3 PowerBooks

The atyfb does not work on my 233MHz PowerBook with Mach64 LP, when the
kernel is booted from firmware. aty_ld_pll_ct() returns 0x22 and xtal
remains at 14.31818. When booted from MacOS, aty_ld_pll_ct() returns 0x3c
and xtal is changed to 29.498928.
Google indicates that all 4 PowerBook models need the higher value.

Signed-off-by: Olaf Hering <redacted>

--- a/drivers/video/aty/atyfb_base.c
+++ b/drivers/video/aty/atyfb_base.c

@@ -2411,7 +2411,7 @@ static int __devinit aty_init(struct fb_
 				diff1 = -diff1;
 			if (diff2 < 0)
 				diff2 = -diff2;
-			if (diff2 < diff1) {
+			if (diff2 < diff1 || (M64_HAS(G3_PB_1024x768))) {
 				par->ref_clk_per = 1000000000000ULL / 29498928;
 				xtal = "29.498928";
 			}

On Sat, 2007-08-25 at 11:13 +0200, Olaf Hering wrote:

The atyfb does not work on my 233MHz PowerBook with Mach64 LP, when the
kernel is booted from firmware. aty_ld_pll_ct() returns 0x22 and xtal
remains at 14.31818. When booted from MacOS, aty_ld_pll_ct() returns 0x3c
and xtal is changed to 29.498928.
Google indicates that all 4 PowerBook models need the higher value.

Seems to break it on my wallstreet first gen (M64 LG)

So NAK for now until we find out a better way.

Ben.