In message [off-list ref] you wrote:
i use 2.4.25 kernel and eldk 3.1.1 on TQM5200 board. i tried denx 2.6.19
kernel to port on TQM5200 but i couldn't.
Did you port 2.6 kernel on TQM5200? Did pci device start working
succesfully after porting 2.6 kernel to TQM5200 board.
Current top-of-tree in our git repo has been tested with a Intel
EEPRO100 network card in the ST5200's PCI slot. It's working.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Unsichtbar macht sich die Dummheit, indem sie immer größere Ausmaße
annimmt. -- Bertold Brecht: Der Tui-Roman
Hi,
i build Linux-2.6.22-gbcfc8d37 kernel lastest kernel from denx git for the board (STK5200 with TQM5200-AB).
ELDK 4.1 version is used.
make mrproper
export ARCH=powerpc
make tqm5200_defconfig
make uImage
It hangs on after following line
Uncompressing Kernel Image ... OK
Our u-boot version : U-Boot 1.1.3 (Apr 7 2005 - 14:42:37)
Any idea will be appreciated.
Regards.
done
Bytes transferred = 1454056 (162fe8 hex)
## Booting image at 00200000 ...
Image Name: Linux-2.6.22-gbcfc8d37
Created: 2007-08-28 19:41:27 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 1453992 Bytes = 1.4 MB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... OK
-----Original Message-----
From: Wolfgang Denk [mailto:wd@denx.de]
Sent: Mon 8/27/2007 10:14 PM
To: Mustafa Cayir
Cc: Oliver Rutsch; linuxppc-embedded@ozlabs.org
Subject: Re: STK5200 pci_enable_device problem
In message [off-list ref] you wrote:
i use 2.4.25 kernel and eldk 3.1.1 on TQM5200 board. i tried denx 2.6.19
kernel to port on TQM5200 but i couldn't.
Did you port 2.6 kernel on TQM5200? Did pci device start working
succesfully after porting 2.6 kernel to TQM5200 board.
Current top-of-tree in our git repo has been tested with a Intel
EEPRO100 network card in the ST5200's PCI slot. It's working.
Best regards,
Wolfgang Denk
--
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Unsichtbar macht sich die Dummheit, indem sie immer größere Ausmaße
annimmt. -- Bertold Brecht: Der Tui-Roman
Hi Mustafa,
Hi,
i build Linux-2.6.22-gbcfc8d37 kernel lastest kernel from denx git for
the board (STK5200 with TQM5200-AB).
ELDK 4.1 version is used.
make mrproper
export ARCH=powerpc
make tqm5200_defconfig
make uImage
It hangs on after following line
Uncompressing Kernel Image ... OK
I encountered exactly the same problem. Using U-Boot 1.2 with Kernel
Linux-2.6.22-gef92f1d7 and a TQM5200S-BD module on the STK52000. I tried
to modify some kernel settings but it always stopped booting at the
"Uncompressing Kernel Image ... OK" line.
Bye,
--
Dipl. Ing. Oliver Rutsch