Hi,
Any comments on the status/feasibility of suspend/resume for LinuxPPC on
Xilinx devices?
The only suspend-related traffic I see here in the last 12 months is for
the lite5200b board.
Any guesstimates of level of difficulty for such a task on Xilinx
PPC405? The core lite5200b patchset didn't look too hairy (just a
modest bit of ASM :), but there would also be Xilinx device driver hooks
to consider.
Also, are there kernel revision dependencies here? Project is currently
on an MVL 2.6.10 tree - but have seen mention of 2.6.17 (?) being
earliest with PPC suspend/resume capability.
All info appreciated. Thanks,
John
On 8/2/07, John Williams [off-list ref] wrote:
Hi,
Any comments on the status/feasibility of suspend/resume for LinuxPPC on
Xilinx devices?
Pretty much non-existant as far as status goes. Feasibility depends
entirely on what power management features the Xilinx silicon
supports. I haven't looked into whether or not the 405 core can be
put into sleep states.
The only suspend-related traffic I see here in the last 12 months is for
the lite5200b board.
Any guesstimates of level of difficulty for such a task on Xilinx
PPC405? The core lite5200b patchset didn't look too hairy (just a
modest bit of ASM :), but there would also be Xilinx device driver hooks
to consider.
I suspect the driver code will be where most of the effort lies.
Also, are there kernel revision dependencies here? Project is currently
on an MVL 2.6.10 tree - but have seen mention of 2.6.17 (?) being
earliest with PPC suspend/resume capability.
Suspend support for ppc has existed for a long time, but there aren't
many embedded ppc boards which support it (5200 being a notable
example).
Personally, I'm keeping up to date with mainline (2.6.22+) on my Virtex tree.
Cheers,
g.
--
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.
grant.likely@secretlab.ca
(403) 399-0195