This patch adds DCR defines needed for 440EP/440EPx clock initialization.
These defines have been introduced in the Bamboo support by Josh Boyer
and are needed for Sequoia as well.
Signed-off-by: Josh Boyer <redacted>
Signed-off-by: Valentine Barshak <redacted>
---
arch/powerpc/boot/dcr.h | 11 +++++++++++
1 files changed, 11 insertions(+)
diff -ruN linux.orig/arch/powerpc/boot/dcr.h linux/arch/powerpc/boot/dcr.h
--- linux.orig/arch/powerpc/boot/dcr.h 2007-07-27 20:37:10.000000000 +0400
+++ linux/arch/powerpc/boot/dcr.h 2007-07-27 21:06:11.000000000 +0400
@@ -121,4 +121,15 @@
#define DCRN_CPC0_MIRQ1 0x0ed
#define DCRN_CPC0_JTAGID 0x0ef
+/* 440EP/440EPx Clock/Power-on Reset regs */
+#define DCRN_CPR0_ADDR 0xc
+#define DCRN_CPR0_DATA 0xd
+#define CPR0_PLLD0 0x60
+#define CPR0_OPBD0 0xc0
+#define CPR0_PERD0 0xe0
+#define CPR0_PRIMBD0 0xa0
+#define CPR0_SCPID 0x120
+#define CPR0_PLLC0 0x40
+
+
#endif /* _PPC_BOOT_DCR_H_ */
On Mon, Jul 30, 2007 at 07:12:45PM +0400, Valentine Barshak wrote:
This patch adds DCR defines needed for 440EP/440EPx clock initialization.
These defines have been introduced in the Bamboo support by Josh Boyer
and are needed for Sequoia as well.
These should really go in the same patch that uses them. I dislike
this business of splitting patches up when the parts are functionally
dependent on each other.
quoted hunk
Signed-off-by: Josh Boyer <redacted>
Signed-off-by: Valentine Barshak <redacted>
---
arch/powerpc/boot/dcr.h | 11 +++++++++++
1 files changed, 11 insertions(+)
diff -ruN linux.orig/arch/powerpc/boot/dcr.h linux/arch/powerpc/boot/dcr.h
--- linux.orig/arch/powerpc/boot/dcr.h 2007-07-27 20:37:10.000000000 +0400
+++ linux/arch/powerpc/boot/dcr.h 2007-07-27 21:06:11.000000000 +0400
@@ -121,4 +121,15 @@
#define DCRN_CPC0_MIRQ1 0x0ed
#define DCRN_CPC0_JTAGID 0x0ef
+/* 440EP/440EPx Clock/Power-on Reset regs */
+#define DCRN_CPR0_ADDR 0xc
+#define DCRN_CPR0_DATA 0xd
+#define CPR0_PLLD0 0x60
+#define CPR0_OPBD0 0xc0
+#define CPR0_PERD0 0xe0
+#define CPR0_PRIMBD0 0xa0
+#define CPR0_SCPID 0x120
+#define CPR0_PLLC0 0x40
+
+
#endif /* _PPC_BOOT_DCR_H_ */
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
On Wed, 1 Aug 2007 12:09:36 +1000
David Gibson [off-list ref] wrote:
On Mon, Jul 30, 2007 at 07:12:45PM +0400, Valentine Barshak wrote:
quoted
This patch adds DCR defines needed for 440EP/440EPx clock
initialization. These defines have been introduced in the Bamboo
support by Josh Boyer and are needed for Sequoia as well.
These should really go in the same patch that uses them. I dislike
this business of splitting patches up when the parts are functionally
dependent on each other.
Yeah. We have a small race here anyway, since two different patch sets
need this but are currently not depending as such. E.g. Bamboo or
Sequoia should be first, and the other should be patches after that
series.
josh