These 3 patches add the powerpc support of Wind River SBC PowerQUICCII.
1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are actually not specific to ads board. So the 1st patch
makes them be shared by different 82xx boards.
2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in DTS
3) The 3rd patch is the platform codes, defconfig and dts for Wind River SBC PowerQUICCII 82xx board.
Any comment is welcome.
Thanks
Mark Zhan
On Mon, 16 Jul 2007 17:01:28 +0800
Mark Zhan wrote:
These 3 patches add the powerpc support of Wind River SBC
PowerQUICCII.
I am sorry, but this would intercept with big 8xx/82xx series from
Scott Wood I am reviewing now. it makes the initial merged code
more maintainable and powerpc-friendly, but would have some rework
required in upcoming patches for new BSPs.
OTOH, it would make all the changes below very short and apparent.
Of course, if something would block those series this one can be considered to merge.
1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are
actually not specific to ads board. So the 1st patch makes them be
shared by different 82xx boards.
2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in
DTS
3) The 3rd patch is the platform codes, defconfig and dts for Wind
River SBC PowerQUICCII 82xx board.
Any comment is welcome.
Thanks
Mark Zhan
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
Sincerely, Vitaly
Hi Vitaly,
When you will send out your 8xx/82xx series patches?
Thanks
Mark Zhan
On Tue, 2007-07-17 at 04:44 +0400, Vitaly Bordug wrote:
On Mon, 16 Jul 2007 17:01:28 +0800
Mark Zhan wrote:
quoted
These 3 patches add the powerpc support of Wind River SBC
PowerQUICCII.
I am sorry, but this would intercept with big 8xx/82xx series from
Scott Wood I am reviewing now. it makes the initial merged code
more maintainable and powerpc-friendly, but would have some rework
required in upcoming patches for new BSPs.
OTOH, it would make all the changes below very short and apparent.
Of course, if something would block those series this one can be considered to merge.
quoted
1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are
actually not specific to ads board. So the 1st patch makes them be
shared by different 82xx boards.
2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC uart in
DTS
3) The 3rd patch is the platform codes, defconfig and dts for Wind
River SBC PowerQUICCII 82xx board.
Any comment is welcome.
Thanks
Mark Zhan
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
On Tue, 17 Jul 2007 13:25:03 +0800
Mark Zhan wrote:
Hi Vitaly,
When you will send out your 8xx/82xx series patches?
As I mentioned, they are not mine but Scott's. And should appear shortly according to him...
Thanks
Mark Zhan
On Tue, 2007-07-17 at 04:44 +0400, Vitaly Bordug wrote:
quoted
On Mon, 16 Jul 2007 17:01:28 +0800
Mark Zhan wrote:
quoted
These 3 patches add the powerpc support of Wind River SBC
PowerQUICCII.
I am sorry, but this would intercept with big 8xx/82xx series from
Scott Wood I am reviewing now. it makes the initial merged code
more maintainable and powerpc-friendly, but would have some rework
required in upcoming patches for new BSPs.
OTOH, it would make all the changes below very short and apparent.
Of course, if something would block those series this one can be
considered to merge.
quoted
1) Currently, some mpc82xx platform hooks in mpc82xx_ads.c are
actually not specific to ads board. So the 1st patch makes them be
shared by different 82xx boards.
2) The 2nd patch make 'cpm_uart_of_init' be able to parse SMC
uart in DTS
3) The 3rd patch is the platform codes, defconfig and dts for Wind
River SBC PowerQUICCII 82xx board.
Any comment is welcome.
Thanks
Mark Zhan
_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
--
Sincerely, Vitaly