[PATCH 2/6] 82xx: Add the support of Wind River SBC PowerQUICCII 82xx

@@ -50,8 +50,6 @@ #include <linux/fs_enet_pd.h>
 #include <sysdev/fsl_soc.h>
 #include <sysdev/cpm2_pic.h>
 
-#include "pq2ads.h"
-
 static int __init get_freq(char *name, unsigned long *val)
 {
 	struct device_node *cpu;

@@ -74,7 +72,7 @@ static int __init get_freq(char *name, u
 	return found;
 }
 
-void __init m82xx_calibrate_decr(void)
+void __init mpc82xx_calibrate_decr(void)
 {
 	ppc_tb_freq = 125000000;
 	if (!get_freq("bus-frequency", &ppc_tb_freq)) {

@@ -88,7 +86,7 @@ void __init m82xx_calibrate_decr(void)
 				"(not found)\n");
 }
 
-void mpc82xx_ads_show_cpuinfo(struct seq_file *m)
+void mpc82xx_show_cpuinfo(struct seq_file *m)
 {
 	uint pvid, svid, phid1;
 	uint memsize = total_memory;

@@ -108,3 +106,25 @@ void mpc82xx_ads_show_cpuinfo(struct seq
 	/* Display the amount of memory */
 	seq_printf(m, "Memory\t\t: %d MB\n", memsize / (1024 * 1024));
 }
+
+#define RMR_CSRE 0x00000001
+
+void mpc82xx_restart(char *cmd)
+{
+	__volatile__ unsigned char dummy;
+
+	local_irq_disable();
+	((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
+
+	/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
+	mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
+	dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
+	printk("Restart failed\n");
+	while (1) ;
+}
+
+void mpc82xx_halt(void)
+{
+	local_irq_disable();
+	while (1) ;
+}

@@ -611,35 +611,15 @@ static int __init mpc82xx_ads_probe(void
 	return 1;
 }
 
-#define RMR_CSRE 0x00000001
-static void m82xx_restart(char *cmd)
-{
-	__volatile__ unsigned char dummy;
-
-	local_irq_disable();
-	((cpm2_map_t *) cpm2_immr)->im_clkrst.car_rmr |= RMR_CSRE;
-
-	/* Clear the ME,EE,IR & DR bits in MSR to cause checkstop */
-	mtmsr(mfmsr() & ~(MSR_ME | MSR_EE | MSR_IR | MSR_DR));
-	dummy = ((cpm2_map_t *) cpm2_immr)->im_clkrst.res[0];
-	printk("Restart failed\n");
-	while (1) ;
-}
-
-static void m82xx_halt(void)
-{
-	local_irq_disable();
-	while (1) ;
-}
-
 define_machine(mpc82xx_ads)
 {
-	.name = "MPC82xx ADS",
-	.probe = mpc82xx_ads_probe,
-	.setup_arch =    mpc82xx_ads_setup_arch,
-	.init_IRQ =    mpc82xx_ads_pic_init,
-	.show_cpuinfo =    mpc82xx_ads_show_cpuinfo,
-	.get_irq =    cpm2_get_irq,
-	.calibrate_decr =    m82xx_calibrate_decr,
-	.restart = m82xx_restart,.halt = m82xx_halt,
+	.name		= "MPC82xx ADS",
+	.probe		= mpc82xx_ads_probe,
+	.setup_arch	= mpc82xx_ads_setup_arch,
+	.init_IRQ	= mpc82xx_ads_pic_init,
+	.show_cpuinfo	= mpc82xx_show_cpuinfo,
+	.get_irq	= cpm2_get_irq,
+	.calibrate_decr	= mpc82xx_calibrate_decr,
+	.restart	= mpc82xx_restart,
+	.halt		= mpc82xx_halt,
 };

@@ -59,8 +59,6 @@ #define SIU_INT_SCC3		((uint)0x2a+CPM_IR
 #define SIU_INT_SCC4		((uint)0x2b+CPM_IRQ_OFFSET)
 
 void m82xx_pci_init_irq(void);
-void mpc82xx_ads_show_cpuinfo(struct seq_file*);
-void m82xx_calibrate_decr(void);
 
 #endif /* __MACH_ADS8260_DEFS */
 #endif /* __KERNEL__ */

@@ -19,6 +19,11 @@ #ifdef CONFIG_PCI_8260
 #include <platforms/82xx/m82xx_pci.h>
 #endif
 
+extern void mpc82xx_show_cpuinfo(struct seq_file *);
+extern void mpc82xx_calibrate_decr(void);
+extern void mpc82xx_restart(char *cmd);
+extern void mpc82xx_halt(void);
+
 #endif /* CONFIG_8260 */
 #endif /* !__ASM_POWERPC_MPC8260_H__ */
 #endif /* __KERNEL__ */