Hi list,
I'm trying to port a driver from 2.6.11 to 2.6.21 and I'm stuck on the following line:
request_irq(MPC83xx_IRQ_EXT5, mpc832xemds_phy_interrupt, SA_SHIRQ, "pm5384", dev);
The first problem is that MPC83xx_IRQ_EXT5 is no longer defined. If I hard code this to
what I think is the right value (i.e. 21) then request_irq fails on insmod.
I obviously need to do something different now that ARCH=powerpc, but I can't find any
examples of code which requests 83xx external interrupts. Can anybody help?
TIA,
Alex
Alex,
Follow this thread...
http://marc.info/?l=linuxppc-embedded&m=116849062702002&w=2
On Thu, 2007-05-10 at 17:45 +0100, Alex Zeffertt wrote:
Hi list,
I'm trying to port a driver from 2.6.11 to 2.6.21 and I'm stuck on the following line:
request_irq(MPC83xx_IRQ_EXT5, mpc832xemds_phy_interrupt, SA_SHIRQ, "pm5384", dev);
The first problem is that MPC83xx_IRQ_EXT5 is no longer defined. If I hard code this to
what I think is the right value (i.e. 21) then request_irq fails on insmod.
I obviously need to do something different now that ARCH=powerpc, but I can't find any
examples of code which requests 83xx external interrupts. Can anybody help?
TIA,
Alex
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded