Mpc875 Ethernet does not work under linux.

5 messages, 3 authors, 2007-02-22 · open the first message on its own page

Mpc875 Ethernet does not work under linux.

From: Cem Vedat ISIK <hidden>
Date: 2007-02-08 10:00:36

Hi all,
Sorry for duplicate posting, since I'm not sure about the topic.

I'm having a problem using ethernet with denx-provided kernel:
linuxppc_2_4_devel-2006-04-06-1735 on mpc875 (a member of mpc885 family).

Ethernet just works (tftpboot and ping are functional) under U-Boot
1.1.6 with mpc875. U-Boot boots with tftpboot, kernel starts (seems
correct-with no error messages) and ifconfig displays,

~ $ ifconfig
eth0      Link encap:Ethernet  HWaddr 00:08:D1:02:06:00
          inet addr:192.168.2.135  Bcast:192.168.2.255  Mask:255.255.255.0
          UP BROADCAST RUNNING MULTICAST  MTU:1500  Metric:1
          RX packets:5540 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:1 dropped:0 overruns:0 carrier:1
          collisions:0 txqueuelen:1000
          RX bytes:583298 (569.6 KiB)  TX bytes:42 (42.0 B)
          Base address:0xe00

lo        Link encap:Local Loopback
          inet addr:127.0.0.1  Mask:255.0.0.0
          UP LOOPBACK RUNNING  MTU:16436  Metric:1
          RX packets:0 errors:0 dropped:0 overruns:0 frame:0
          TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
          collisions:0 txqueuelen:0
          RX bytes:0 (0.0 B)  TX bytes:0 (0.0 B)
$

where, the MAC addr is same as in U-Boot ( U-Boot correctly hands the
mac addr to linux kernel).

The mpc875 is situated on a daughter card, plugged onto the main board,
that contains a single phy (lxt972a). We already have a mpc852 based
daughter board which only has a single MII interface that works with the
mainboard hardware and with linuxppc_2_4_devel-2006-04-06-1735 kernel. I
mean, the difference is only the cpu type. The same mainboard/kernel
configuration for mpc852 works fine.

For some real-time patches and considerations, I have to use 2.4.25
kernel (linuxppc_2_4_devel-2006-04-06-1735). Therefore, need an idea on
using ethernet with this kernel.

Despite identifying the eth0 correctly ( which pings itself and
127.0.0.1 ), ping (and wget also) does not work, not only in pinging out
but also in replying pings.

(Pinging PC, from mpc875)
~ $ ping 192.168.2.108
No response from 192.168.2.108
~ $

Pinging the other way around (mpc875 from PC), I get "Destination
Unreachable", that is,

root@cem-kubuntu:/opt/kernel# ping 192.168.2.135
PING 192.168.2.135 (192.168.2.135) 56(84) bytes of data.
From 192.168.2.108 icmp_seq=1 Destination Host Unreachable
root@cem-kubuntu:/opt/kernel#

At this time, on the serial console of mpc875 I get,

~ $ NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out.
Ring data dump: cur_tx c3070108, tx_free 0, dirty_tx c3070108, cur_rx
c3070018
 tx: 16 buffers
  c3070100: 9c00 002a 00eb9aa2
  c3070108: 9c00 002a 00eb9322
  c3070110: 9c00 002a 00eb93a2
  c3070118: 9c00 002a 00eb9422
  c3070120: 9c00 002a 00eb94a2
  c3070128: 9c00 002a 00eb9522
  c3070130: 9c00 002a 00eb95a2
  c3070138: 9c00 002a 00eb9622
  c3070140: 9c00 002a 00eb96a2
  c3070148: 9c00 002a 00eb9722
  c3070150: 9c00 002a 00eb97a2
  c3070158: 9c00 002a 00eb9822
  c3070160: 9c00 002a 00eb98a2
  c3070168: 9c00 002a 00eb9922
  c3070170: 9c00 002a 00eb99a2
  c3070178: bc00 002a 00eb9a22
 rx: 32 buffers
  c3070000: 8880 0072 0025c000
  c3070008: 8880 0040 0025c800
  c3070010: 8880 0040 0025b000
  c3070018: 8880 0072 0025b800
  c3070020: 8880 0060 0025a000
  c3070028: 8880 0140 0025a800
  c3070030: 8880 0072 00259000
  c3070038: 8880 0040 00259800
  c3070040: 8880 0072 00258000
  c3070048: 8880 0040 00258800
  c3070050: 8880 0072 00257000
  c3070058: 8880 0072 00257800
  c3070060: 8880 0072 00256000
  c3070068: 8880 005c 00256800
  c3070070: 8880 005c 00255000
  c3070078: 8880 0072 00255800
  c3070080: 8880 0072 00254000
  c3070088: 8880 0072 00254800
  c3070090: 8880 0072 00253000
  c3070098: 8880 0040 00253800
  c30700a0: 8880 0040 00252000
  c30700a8: 8880 0059 00252800
  c30700b0: 8880 0062 00251000
  c30700b8: 8880 0072 00251800
  c30700c0: 8880 0072 00250000
  c30700c8: 8880 0065 00250800
  c30700d0: 8880 0068 0024f000
  c30700d8: 8880 0040 0024f800
  c30700e0: 8880 0072 0024e000
  c30700e8: 8880 0072 0024e800
  c30700f0: 8880 0072 0024d000
  c30700f8: a880 0072 0024d800
NETDEV WATCHDOG: eth0: transmit timed out
eth0: transmit timed out.

What can I do, to get ethernet up and working?

I appreciate your help, thank you very much.

--
Cem Vedat ISIK
cem.isik@karel.com.tr


-----------------------------------------------------------------------
Bu mesaj Karel MailScanner ile tehlikeli icerik ve virus kontrolunden gecirilmistir.
KAREL A.S. - Bilgi Teknolojileri Bolumu
This message has been scanned for viruses and dangerous content by Karel MailScanner, and is believed to be clean.
KAREL A.S. - Information Technologies Department

Re: Mpc875 Ethernet does not work under linux.

From: Dan Malek <hidden>
Date: 2007-02-09 17:26:12

On Feb 8, 2007, at 5:00 AM, Cem Vedat ISIK wrote:
I'm having a problem using ethernet with denx-provided kernel:
linuxppc_2_4_devel-2006-04-06-1735 on mpc875 (a member of mpc885 family).
Sounds like you didn't properly port your
kernel.  I use both 2.4 and 2.6 on 875 and 885
every day.  Works fine.  Take a look at your
clock routing and PHY support functions to
ensure that's all correct.


	-- Dan

Re: Mpc875 Ethernet does not work under linux.

From: Cem Vedat ISIK <hidden>
Date: 2007-02-14 08:35:18

Dan,
As 2.4.25 kernel, I'm using denx-supplied
linuxppc_2_4_devel-2006-04-06-1735 kernel, which shows me "8xx" option
as "Processor Type" in "Platform Support" section with "make menuconfig"
command.
Well, I want to try kernel 2.6.x but, I haven't seen any option for 875
support with "make menuconfig" command. Could you suggest any methods to
configure 2.6 kernel for mpc875?
Thanks in advance, looking forward to hearing from you soon.

Dan Malek wrote:
On Feb 8, 2007, at 5:00 AM, Cem Vedat ISIK wrote:
quoted
I'm having a problem using ethernet with denx-provided kernel:
linuxppc_2_4_devel-2006-04-06-1735 on mpc875 (a member of mpc885 family).
Sounds like you didn't properly port your
kernel.  I use both 2.4 and 2.6 on 875 and 885
every day.  Works fine.  Take a look at your
clock routing and PHY support functions to
ensure that's all correct.


    -- Dan

-- 
Cem Vedat ISIK
cem.isik@karel.com.tr

PGP Key ID = 0×6D7B02F7
fingerprint = 8C34 144C 999A 917C 8EA0 1199 C136 C114 6D7B 02F7

-----------------------------------------------------------------------
Bu mesaj Karel MailScanner ile tehlikeli icerik ve virus kontrolunden gecirilmistir.
KAREL A.S. - Bilgi Teknolojileri Bolumu
This message has been scanned for viruses and dangerous content by Karel MailScanner, and is believed to be clean.
KAREL A.S. - Information Technologies Department

RE: Mpc875 Ethernet does not work under linux.

From: DI BACCO ANTONIO - technolabs <hidden>
Date: 2007-02-14 08:48:10

=20
Well, I want to try kernel 2.6.x but, I haven't seen any option for 875
support with "make menuconfig" command. Could you suggest any methods
to
configure 2.6 kernel for mpc875?
A good starting point could be a board like mpc885ads

Re: Mpc875 Ethernet does not work under linux.

From: Cem Vedat ISIK <hidden>
Date: 2007-02-22 08:20:47

Could you please tell me how I can activate the menu to select mpc885ads?

DI BACCO ANTONIO - technolabs wrote:
 
quoted
Well, I want to try kernel 2.6.x but, I haven't seen any option for 875
support with "make menuconfig" command. Could you suggest any methods
to
quoted
configure 2.6 kernel for mpc875?
A good starting point could be a board like mpc885ads


-- 
Cem Vedat ISIK
cem.isik@karel.com.tr
Iletisim Teknolojileri
Tasarim Muhendisi

PGP Key ID = 0×6D7B02F7
fingerprint = 8C34 144C 999A 917C 8EA0 1199 C136 C114 6D7B 02F7

-----------------------------------------------------------------------
Bu mesaj Karel MailScanner ile tehlikeli icerik ve virus kontrolunden gecirilmistir.
KAREL A.S. - Bilgi Teknolojileri Bolumu
This message has been scanned for viruses and dangerous content by Karel MailScanner, and is believed to be clean.
KAREL A.S. - Information Technologies Department
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help