In message [off-list ref] you wrote:
2. I used ELDK3.1.1 to build it and install to ramdisk that is used for
TQM8xxL (Using kernel 2.6.11)
ELDK 3.x has been tested with 2.4 kernel trees only. For a 2.6
kernel, you should use ELDK 4.x.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Hiring experienced unix people is like a built-in filter against
idiots. Hiring experienced NT people provides no such guarantee.
-- Miguel Cruz in WgL96.349$CC.122704@typhoon2.ba-dsg.net
I tried to download
net-snmp-5.2.1.2-1_1.src.rpm<ftp://ftp.sunet.se/pub/Linux/distributions/eldk/4.0/ppc-linux-x86/sources/target/SRPMS/net-snmp-5.2.1.2-1_1.src.rpm>of
ELDK4.0 and used ELDK4.0 to build. But the same error happens :(. Then I
tried to build net-snmp-5.0.6-17_2.src.rpm with ELDK4.0. The error still
happens.
Best Regards,
An Le.
On 1/11/07, Wolfgang Denk [off-list ref] wrote:
In message [off-list ref]
you wrote:
quoted
2. I used ELDK3.1.1 to build it and install to ramdisk that is used for
TQM8xxL (Using kernel 2.6.11)
ELDK 3.x has been tested with 2.4 kernel trees only. For a 2.6
kernel, you should use ELDK 4.x.
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Hiring experienced unix people is like a built-in filter against
idiots. Hiring experienced NT people provides no such guarantee.
-- Miguel Cruz in WgL96.349$CC.122704@typhoon2.ba-dsg.net