Re: Windows boot recognition

You may need to configure the board in PCI agent mode so that it can
respond to the PCI configuration cycles. By fefault, it might come 
in master mode ( wherein it generates the PCI cycles and configures 
other devices in its PCI bus)

It should be a hardware configuration option. So you should see a 
jumper on the board or you may need to mount/unmount a resistor.
Pl check the hardware user manual.

Thanks
G.Muruganandam

Hi Tim,

quoted

I am trying to develop a windows driver for the MPC8349MDS board 

but 

quoted

Windows does not seem to acknowledge the existence of the board in 

the 

quoted

pci slot.  The device manager does not see the board and no 

resources 

quoted

are allocated on boot.

If no resources are allocated on boot, then it indicates the BIOS
has not found the board. Have you booted this same machine under
Linux? If not, grab a Knoppix or Ubuntu CD and boot the machine
and see if lspci sees the board.

quoted

Running Linux as my OS works perfectly.  I have 
tried both Windows 2000 and XP on two different machines.  Any 

ideas?

Under Windows I've used a tool called PCI tree to find
PCI resources of boards, it'll even let you manipulate
config space registers (much like setpci can under Linux).
Try running that tool to see if the board is setup
correctly by the BIOS.

If your Windows and Linux development machines are different,
then you may just be fighting with hardware. So first confirm
that the BIOS is finding the board.

Also check for hardware differences between the development
machines; eg. 33MHz or 66MHz, 32-bit or 64-bit PCI.

Dave

_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded

*************************************************************
GDA Technologies, Inc.		
1010 Rincon Circle 
San Jose CA, 95131
Phone	(408) 432-3090
Fax	(408) 432-3091

Accelerate Your Innovation	
**************************************************************


=====
This message contains information from GDA Technologies Inc and 
affiliates, and is intended for the sole use of the individual and 
entity to whom it is addressed. It may contain information, including 
any attachments, that is privileged, confidential and exempt from 
disclosure under applicable law. If you are not the intended 
addressee, nor authorized to receive for the intended addressee, you 
are hereby notified that you may not use, copy, disclose or distribute 
to anyone the message or any information contained in the message. If 
you have received this electronic transmission in error, please notify 
the sender immediately by a "reply to sender only" message and destroy 
all electronic and hard copies of the communication, including 
attachments.
====