Hi,
currently i am migrating an existing Linux-BSP for the MPC8347/9 from =
Kernel 2.6.13 to 2.6.17 with flattened device tree.
Now, i recognized, that the Makefile and Kconfig in drivers/usb/host do =
not have any entries to configure and compile the ehci-fsl.c driver.
Does this mean, that ehci-fsl.c is no longer required, because the =
generic EHCI-driver now handles this; or is it just the case, that USB =
for Freescale processor was not yet tested on Kernel 2.6.17 ?
--=20
Mit freundlichen Gruessen / Best regards
Claus Gindhart
SW R&D
Kontron Modular Computers
phone :++49 (0)8341-803-374
mailto:claus.gindhart@kontron-modular.com
http://www.kontron.com
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GU d- s++:>++:+ a+ C++$ !U !P L++>$ E-- W+(-) N- o?
K? w !O !M V !PS PE- Y+ PGP+ t 5? X R* tv- b+ DI+++
D-- G e++> h--- !r x+++
------END GEEK CODE BLOCK------
=20
ehci-fsl.c is included in ehci.c, not handled by Makefile.
Best Regards,
Leo
-----Original Message-----
From: linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org] On
Behalf Of
Claus Gindhart
Sent: Friday, August 18, 2006 2:26 PM
To: linuxppc-embedded@ozlabs.org
Subject: USB-Driver for Freescale ehci-fsl.c on Kernel 2.6.17
=20
Hi,
=20
currently i am migrating an existing Linux-BSP for the MPC8347/9 from
Kernel 2.6.13
to 2.6.17 with flattened device tree.
=20
Now, i recognized, that the Makefile and Kconfig in drivers/usb/host
do not have
any entries to configure and compile the ehci-fsl.c driver.
=20
Does this mean, that ehci-fsl.c is no longer required, because the
generic
EHCI-driver now handles this; or is it just the case, that USB for
Freescale
processor was not yet tested on Kernel 2.6.17 ?
=20
--
Mit freundlichen Gruessen / Best regards
=20
Claus Gindhart
SW R&D
Kontron Modular Computers
phone :++49 (0)8341-803-374
mailto:claus.gindhart@kontron-modular.com
http://www.kontron.com
=20
-----BEGIN GEEK CODE BLOCK-----
Version: 3.1
GU d- s++:>++:+ a+ C++$ !U !P L++>$ E-- W+(-) N- o?
K? w !O !M V !PS PE- Y+ PGP+ t 5? X R* tv- b+ DI+++
D-- G e++> h--- !r x+++
------END GEEK CODE BLOCK------
=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded