Hi,
I recently bought a Synology Network Attached Server DS-106e, run using a "Linux 2. 4.22-uc-0" Kernel, under 8041 PPC, no "gcc" installed. I want to build a crosslink gcc compiler for it in another "debian 2.6 kernel" linux. I find many options in the crosslink build script on ppc, but can't find any option for 8041 PPC. So what option should I choose? And further can I put the artifacts just compiled in my Network Attached Server? So that I can compile anything directly in my NAS.
Many Thanks,
Roy
_______________________________________
YM - 離線訊息
就算你沒有上網，你的朋友仍可以留下訊息給你，當你上網時就能立即看到，任何說話都冇走失。
http://messenger.yahoo.com.hk
chun fung siu wrote:
Hi,
I recently bought a Synology Network Attached Server DS-106e, run using
a "Linux 2. 4.22-uc-0" Kernel, under 8041 PPC, no "gcc" installed. I
want to build a crosslink gcc compiler for it in another "debian 2.6
kernel" linux. I find many options in the crosslink build script on ppc,
but can't find any option for 8041 PPC. So what option should I choose?
And further can I put the artifacts just compiled in my Network Attached
Server? So that I can compile anything directly in my NAS.
The processor is probably an *MPC8241*.
The DS101g is also an MPC8241. So this should provide you with
some useful info:
http://www.nslu2-linux.org/wiki/DS101/HomePage
http://www.nslu2-linux.org/wiki/DS101/DS101GHardware
Dave
http://images.tomshardware.com/2006/06/28/not_going_wrong_with_the_synol
ogy_ds/synology_ds106e_main_board_big.jpg
Here is a picture of the exact model. I can confirm that it's a
MPC8241.
Best Regards,
Leo
-----Original Message-----
From: linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org
[mailto:linuxppc-embedded-bounces+leoli=3Dfreescale.com@ozlabs.org] On
Behalf Of
David Hawkins
Sent: Wednesday, August 09, 2006 12:48 AM
To: chun fung siu
Cc: linuxppc-embedded@ozlabs.org
Subject: Re: Trouble on building crossover compiler for Synology 8041
PPCbased NAS
=20
chun fung siu wrote:
quoted
Hi,
I recently bought a Synology Network Attached Server DS-106e, run
using
quoted
a "Linux 2. 4.22-uc-0" Kernel, under 8041 PPC, no "gcc" installed. I
want to build a crosslink gcc compiler for it in another "debian 2.6
kernel" linux. I find many options in the crosslink build script on
ppc,
quoted
but can't find any option for 8041 PPC. So what option should I
choose?
quoted
And further can I put the artifacts just compiled in my Network
Attached
quoted
Server? So that I can compile anything directly in my NAS.
=20
The processor is probably an *MPC8241*.
=20
The DS101g is also an MPC8241. So this should provide you with
some useful info:
=20
http://www.nslu2-linux.org/wiki/DS101/HomePage
http://www.nslu2-linux.org/wiki/DS101/DS101GHardware
=20
Dave
=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded