Hello,
I am a newbie, working on the MPC8555E(Freescale).
The Gianfar Ethernet Driver configures the TSECs on
the board.I see that out of the 4 Ethernet Interfaces
only 2 are configured when the gianfar driver is
loaded(I have complied it as a modules).I checked this
via "ifconfig" command. Out of the 4 ports, 2 are
located on the basic carrier board and the other two
on the IOCard expansion.
I wonder why all four of them are not configured?
Thanks in advance,
Alok.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection around
http://mail.yahoo.com
8555E only supports TWO TSECs. 8548E supports four eTSECs.
Haiying=20
quoted
quoted
-----Original Message-----
From:=20
linuxppc-embedded-bounces+haiying.wang=3Dfreescale.com@ozlabs.
org [mailto:linuxppc-embedded->
quoted
bounces+haiying.wang=3Dfreescale.com@ozlabs.org] On Behalf Of=20
quoted
Alok Barsode
Sent: Monday, July 24, 2006 9:45 AM
To: Linuxppc-embedded@ozlabs.org
Subject: Query regarding Gianfar Ethernet Driver for MPC8555E
Hello,
I am a newbie, working on the MPC8555E(Freescale).=20
The Gianfar Ethernet Driver configures the TSECs on the=20
board.I see that out of the 4 Ethernet Interfaces only 2=20
are configured when the gianfar driver is loaded(I have=20
complied it as a modules).I checked this via "ifconfig"=20
command. Out of the 4 ports, 2 are located on the basic=20
carrier board and the other two on the IOCard expansion.
I wonder why all four of them are not configured?
Thanks in advance,
Alok.
__________________________________________________
Do You Yahoo!?
Tired of spam? Yahoo! Mail has the best spam protection=20
around http://mail.yahoo.com=20
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded