RE: does Gianfar Ethernet Controller Version 1.1 support MARVELL 88E1111?

Hi all,
I'm debugging my board with MPC 8540 and marvell 88e1111 
designed on it. 
I'm sure the hardware connection is correct, and the phy's ID 
could be read 
through terminal port. But anyway, phy can not work. I wonder 

Are you sure the hardware is no problem?
Can you successfully tftp files with the port in u-boot?
What is the phy interface mode you used? 

if it is the 
driver's problem? Since the Gianfar Ethernet Controller Version 1.1 
surpport 88e1011s, but some 88e1111's registers are different from 
88e1011s'. Actually I'm a new guy to Linux. Has anybody ever 
used 88e1111 
phy in Linux envirenmemt? Please  

Basically, the 88e1111 is same 88e1011s.

give me some points. Thank you! 
I have read the Gianfar ethernet controller driver, but it's 
difficult for 
me to find out the sofware flow.

Change the board-specific things, for example
PHY address, PHY interrupt. 
Please reference /arch/ppc/platforms/85xx/mpc8540_ads.c

-Dave