RE: Linux ppc port problem

2 messages, 2 authors, 2006-06-22 · open the first message on its own page

RE: Linux ppc port problem

From: Zhan, Rongkai <hidden>
Date: 2006-06-21 20:54:35 

You even have not a working kernel console.

Best Regards,
Mark. Zhan
-----Original Message-----
From: linuxppc-dev-bounces+rongkai.zhan=3Dwindriver.com@ozlabs.org =
[mailto:linuxppc-dev-bounces+rongkai.zhan=3Dwindriver.com@ozlabs.org] On =
Behalf Of robinpv
Sent: Wednesday, June 21, 2006 5:45 PM
To: linuxppc-dev@ozlabs.org
Subject: Linux ppc port problem

Hi ,
     I am trying to the port linux to the mpc5200 based board( =
Lite5200.)
     I am using linux version 2.6.16.1.  I am getting the below message=20
after that, linux seems to he in hanged state
     I debugged and found that the control is reaching the schedule() in =

rest_init() which is the last function called in start_kernel().
     I have set the command line arguements to "console=3DttyPSC0,115200 =

root=3D/dev/ram0 rw ramdisk_size=3D16384"
     Can you suggest, how to proceed or what could be the problem.

With regards
Robin


## Booting image at ff000000 ...
   Image Name:   Linux-2.6.16.1
   Image Type:   PowerPC Linux Kernel Image (gzip compressed)
   Data Size:    1301999 Bytes =3D  1.2 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff200000 ...
   Image Name:   ramdisk
   Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
   Data Size:    2788700 Bytes =3D  2.7 MB
   Load Address: 00000000
   Entry Point:  00000000
   Verifying Checksum ... OK
   Loading Ramdisk to 03d05000, end 03fadd5c ... OK
id mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev

Re: Linux ppc port problem

From: robinpv <hidden>
Date: 2006-06-22 01:09:25 

The linux is up, Thank you. I did do anything checked today console is 
up!! strange

With Regards
Robin

Zhan, Rongkai wrote:

You even have not a working kernel console.

Best Regards,
Mark. Zhan
-----Original Message-----
From: linuxppc-dev-bounces+rongkai.zhan=windriver.com@ozlabs.org [mailto:linuxppc-dev-bounces+rongkai.zhan=windriver.com@ozlabs.org] On Behalf Of robinpv
Sent: Wednesday, June 21, 2006 5:45 PM
To: linuxppc-dev@ozlabs.org
Subject: Linux ppc port problem

Hi ,
    I am trying to the port linux to the mpc5200 based board( Lite5200.)
    I am using linux version 2.6.16.1.  I am getting the below message 
after that, linux seems to he in hanged state
    I debugged and found that the control is reaching the schedule() in 
rest_init() which is the last function called in start_kernel().
    I have set the command line arguements to "console=ttyPSC0,115200 
root=/dev/ram0 rw ramdisk_size=16384"
    Can you suggest, how to proceed or what could be the problem.

With regards
Robin


## Booting image at ff000000 ...
  Image Name:   Linux-2.6.16.1
  Image Type:   PowerPC Linux Kernel Image (gzip compressed)
  Data Size:    1301999 Bytes =  1.2 MB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Uncompressing Kernel Image ... OK
## Loading RAMDisk Image at ff200000 ...
  Image Name:   ramdisk
  Image Type:   PowerPC Linux RAMDisk Image (gzip compressed)
  Data Size:    2788700 Bytes =  2.7 MB
  Load Address: 00000000
  Entry Point:  00000000
  Verifying Checksum ... OK
  Loading Ramdisk to 03d05000, end 03fadd5c ... OK
id mach(): done
MMU:enter
MMU:hw init
MMU:mapin
MMU:setio
MMU:exit
setup_arch: enter
setup_arch: bootmem
arch: exit

_______________________________________________
Linuxppc-dev mailing list
Linuxppc-dev@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help