[PATCH 7/10] Add use of mpc86xx.h include files in legacy header files.

Signed-off-by: Xianghua Xiao <redacted>
Signed-off-by: Jon Loeliger <redacted>

---

 include/asm-ppc/io.h      |    2 ++
 include/asm-ppc/ppc_sys.h |    2 ++
 include/asm-ppc/serial.h  |    2 ++
 3 files changed, 6 insertions(+), 0 deletions(-)

diff --git a/include/asm-ppc/io.h b/include/asm-ppc/io.h
index b919d8f..0802be9 100644
--- a/include/asm-ppc/io.h
+++ b/include/asm-ppc/io.h

@@ -37,6 +37,8 @@ #elif defined(CONFIG_83xx)
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_86xx)
+#include <asm/mpc86xx.h>
 #elif defined(CONFIG_APUS)
 #define _IO_BASE	0
 #define _ISA_MEM_BASE	0

diff --git a/include/asm-ppc/ppc_sys.h b/include/asm-ppc/ppc_sys.h
index 40f197a..4eaf80d 100644
--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h

@@ -27,6 +27,8 @@ #elif defined(CONFIG_83xx)
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_86xx)
+#include <asm/mpc86xx.h>
 #elif defined(CONFIG_8xx)
 #include <asm/mpc8xx.h>
 #elif defined(CONFIG_PPC_MPC52xx)

diff --git a/include/asm-ppc/serial.h b/include/asm-ppc/serial.h
index b74af54..e819250 100644
--- a/include/asm-ppc/serial.h
+++ b/include/asm-ppc/serial.h

@@ -36,6 +36,8 @@ #elif defined(CONFIG_83xx)
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_86xx)
+#include <asm/mpc86xx.h>
 #elif defined(CONFIG_RADSTONE_PPC7D)
 #include <platforms/radstone_ppc7d.h>
 #else

On Jun 7, 2006, at 5:42 PM, Jon Loeliger wrote:

Signed-off-by: Xianghua Xiao <redacted>
Signed-off-by: Jon Loeliger <redacted>

---

 include/asm-ppc/io.h      |    2 ++
 include/asm-ppc/ppc_sys.h |    2 ++
 include/asm-ppc/serial.h  |    2 ++
 3 files changed, 6 insertions(+), 0 deletions(-)

Are the io.h & serial.h really needed for ARCH=powerpc?  What does  
serial.h get from asm/mpc86xx.h?  I can see the possibility of io.h  
needing some stuff from asm/mpc86xx.h

- k

this should go since I can't imagine your using ppc_sys.

On Wed, 2006-06-07 at 23:49, Kumar Gala wrote:

On Jun 7, 2006, at 5:42 PM, Jon Loeliger wrote:

quoted

Signed-off-by: Xianghua Xiao <redacted>
Signed-off-by: Jon Loeliger <redacted>

---

 include/asm-ppc/io.h      |    2 ++
 include/asm-ppc/ppc_sys.h |    2 ++
 include/asm-ppc/serial.h  |    2 ++
 3 files changed, 6 insertions(+), 0 deletions(-)

Are the io.h & serial.h really needed for ARCH=powerpc?  What does  
serial.h get from asm/mpc86xx.h?  I can see the possibility of io.h  
needing some stuff from asm/mpc86xx.h

I'll check and do a round of include scrubbing.
There was some silliness going on there earlier,
but it could have been cleaned up along the way too.

quoted

index 40f197a..4eaf80d 100644

--- a/include/asm-ppc/ppc_sys.h
+++ b/include/asm-ppc/ppc_sys.h

@@ -27,6 +27,8 @@ #elif defined(CONFIG_83xx)
 #include <asm/mpc83xx.h>
 #elif defined(CONFIG_85xx)
 #include <asm/mpc85xx.h>
+#elif defined(CONFIG_PPC_86xx)
+#include <asm/mpc86xx.h>

this should go since I can't imagine your using ppc_sys.

Right.  Leftover cleaning tidbits.  It's gone.

Thanks,
jdl