[PATCH] documentation: add bus-frequency property to SOC node
flat view
DORMANTno replies
From: Becky Bruce <hidden>
Date: 2006-02-06 20:26:31
Subsystem:
documentation, the rest · Maintainers:
Jonathan Corbet, Linus Torvalds
Updated SOC node definition in documentation to include bus-frequency property. Also extended mdio example to match specification. Signed-off-by: Becky Bruce <redacted> Signed-off-by: Kumar Gala <redacted> --- commit 3441bf59c7e1dc3823f9be57838a2536c78f6f8f tree 2901a0e19418f1fe904ff0d041c630b3af048961 parent 66c490c9b00c52cd0f1e088ad689c9148e46f49e author Becky Bruce [off-list ref] Thu, 02 Feb 2006 15:41:11 -0600 committer Becky Bruce [off-list ref] Thu, 02 Feb 2006 15:41:11 -0600 Documentation/powerpc/booting-without-of.txt | 8 ++++++++ 1 files changed, 8 insertions(+), 0 deletions(-)
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 1284498..54e5f9b 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt@@ -880,6 +880,10 @@ address which can extend beyond that lim - device_type : Should be "soc" - ranges : Should be defined as specified in 1) to describe the translation of SOC addresses for memory mapped SOC registers. + - bus-frequency: Contains the bus frequency for the SOC node. + Typically, the value of this field is filled in by the boot + loader. + Recommended properties:
@@ -919,6 +923,7 @@ SOC. device_type = "soc"; ranges = <00000000 e0000000 00100000> reg = <e0000000 00003000>; + bus-frequency = <0>; }
@@ -1170,6 +1175,8 @@ platforms are moved over to use the flat mdio@24520 { reg = <24520 20>; + device_type = "mdio"; + compatible = "gianfar"; ethernet-phy@0 { ......
@@ -1317,6 +1324,7 @@ not necessary as they are usually the sa device_type = "soc"; ranges = <00000000 e0000000 00100000> reg = <e0000000 00003000>; + bus-frequency = <0>; mdio@24520 { reg = <24520 20>;