Re: Regarding booting 440 gr board / ibm emac driver

In message [off-list ref] you wrote:

This is kiran here. I'm working on 440GR (Yosemite) board to boot linux-2.6
.13.4.

Don't use old code. Please use the current version.

What could be the issue? Do we need to modify the driver for MAC address is
sue??

Just use current code. You can find ready to  run  binaries  and  the
corresponding sources (git repository) on our server:

ftp://ftp.denx.de/pub/u-boot/images/amcc/yosemite/u-boot.bin
ftp://ftp.denx.de/pub/linux/images/amcc/yosemite/uImage
and http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
(git tag "DENX-2005-12-03-2208" or later).

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
A Puritan is someone who is deathly afraid that  someone,  somewhere,
is having fun.

On Friday 30 December 2005 22:17, Wolfgang Denk wrote:

In message [off-list ref] you wrote:

quoted

This is kiran here. I'm working on 440GR (Yosemite) board to boot
linux-2.6 .13.4.

Don't use old code. Please use the current version.

quoted

What could be the issue? Do we need to modify the driver for MAC address
is sue??

Just use current code. You can find ready to  run  binaries  and  the
corresponding sources (git repository) on our server:

ftp://ftp.denx.de/pub/u-boot/images/amcc/yosemite/u-boot.bin
ftp://ftp.denx.de/pub/linux/images/amcc/yosemite/uImage
and http://www.denx.de/cgi-bin/gitweb.cgi?p=linux-2.6-denx.git
(git tag "DENX-2005-12-03-2208" or later).

Just a quick note, since you mentioned using 440GR (Yosemite): Yosemite is the 
eval board for the 440EP and Yellowstone is the eval board for the 440GR. 
Images for both boards are available at the site referenced by Wolfgang.

Best regards,
Stefan