Video Card to Lite5200

Hi Denx,
I am just looking for a cheaper video card to use with Lite5200 board.
CoralP is very expansive, then I will use ATI Rage Mobility.

I see some reference to this board at:
http://ozlabs.org/pipermail/linuxppc-embedded/2004-July/014848.html

Here in Brazil I get an "ATI RAGE XL 8MB PCI" (ATI Mobility 8M TV PCI),
it is PCI v. 2.2 (support 3.3V and 5V).

But I found some tips here at ozlabs:

"Other possible problem is that i found with ATI Rage Mobility M1 EVA board
that it's 723 3.3V regulator needed as default +12V to operate."

Well, my video card is not ATI Rage Mobility M1 EVA, it has not 723
regulator, it use MTD3302 as regulator, do you know if I need change
something on the Lite5200's PCI slot to it work with this video card?

My Lite5200 is Version 2.0, and Freescale connected some wire (small cables)
to PCI slot, maybe to fix some PCI problems.

I am using linux kernel 2.6.14, downloaded from denx's web site. Linux is
running fine in this board, but until now I am using only serial console.
Now I want use a video card with it.

Best regards,

Alan