RFI doesn't branch off?

I am chasing a very similar problem. Did you ever find resolution to
your problem? Can you share what you did to get past this?

 

Thanks.

 

--

 

Amit Shah shahamit at gmail.com
<mailto:linuxppc-embedded%40ozlabs.org?Subject=RFI%20doesn%27t%20branch%
20off%3F&In-Reply-To=> 
Wed Aug 25 20:20:33 EST 2004 

*	Previous message: RFI doesn't branch off?
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/015393.html> 
*	Next message: value of XIP? and whether it works with 2.6
kernel?
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/015394.html> 
*	Messages sorted by: [ date ]
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/date.html#154
10>  [ thread ]
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/thread.html#1
5410>  [ subject ]
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/subject.html#
15410>  [ author ]
<http://ozlabs.org/pipermail/linuxppc-embedded/2004-August/author.html#1
5410>  

  _____  

Amit Shah wrote:
 

Hi all,

I have a strange issue with a custom board running a 750GX on a
Marvell 64360 bridge. I transferred control to the uImage via u-boot
(which I had to modify for my board-specific UART and SDRAM inits,
also disabling PCI).

Using the UART that's initialized by u-boot, I put some putchar()s in
head.S to figure out where the kernel was freezing. It seems 'rfi' in
mmu_off doesn't jump off to '__after_mmu_off' as expected. I also put
some pattern into SDRAM before an after mmu_off. I just see the
pattern (via a PCI interface) put before mmu_off.

The contents of SRR0 correctly point to __after_mmu_off just before
the 'rfi'. However, the 'rfi' documentation says the value of SRR0 is
concatenated with '0x0b00'. I don't think this should be done.
Anyways, since this code is supposed to work, I'm not sure why it
isn't working.

 
If I keep the DR enabled in MSR, the RFI goes back properly... disabling
DR
causes some randomness.
 

Can any u-boot initializations be causing this? I guess not, I've not
touched any CPU-specific settings in u-boot.

Can anyone give me some pointers?

 
--
Amit Shah
http://amitshah.nav.to/