Tsi108

I've just received the evaluation board for the Tsi108 bridge:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCEVALHPC2-7448&nodeId=0162468rH3bTdGb9MM

The kernel supplied is 2.6.11.1, and it looks like it needs the
following to bring it up to date:

1) Using platform_device for on-chip resources.
2) Coding standards cleanup.
3) Fix the ethernet driver
3a) Fix bugs in stopping and starting interface
3b) remove virt_to_phys
3c) ethtool support?

Has anybody started on this before I begin?

-- 
Adrian Cox [off-list ref]

On Wed, 23 Nov 2005, Adrian Cox wrote:

I've just received the evaluation board for the Tsi108 bridge:

http://www.freescale.com/webapp/sps/site/prod_summary.jsp?code=MCEVALHPC2-7448&nodeId=0162468rH3bTdGb9MM

The kernel supplied is 2.6.11.1, and it looks like it needs the
following to bring it up to date:

1) Using platform_device for on-chip resources.
2) Coding standards cleanup.
3) Fix the ethernet driver
3a) Fix bugs in stopping and starting interface
3b) remove virt_to_phys
3c) ethtool support?

Has anybody started on this before I begin?

I'm not aware of anyone, but I know I told people at FSL to clean this up.

Also, the PIC code needs to be looked at. The TSI108 looked too similar to 
openpic to warrant its own code when I reviewed this code awhile ago.

- kumar