BDI2000 and Linux 2.6 kernel

3 messages, 2 authors, 2005-11-15 · open the first message on its own page

BDI2000 and Linux 2.6 kernel

From: Marcelo Tosatti <hidden>
Date: 2005-11-07 17:12:14

Hi,

Currently gdb over BDI (and I've seen other reports on this list) fails to
translate virtual->physical addresses on PPC 8xx:

*** MMU: address translation for 0xC000C66C failed
*** MMU: address translation for 0xC000C66C failed

Thats because the v2.6 kernel was changed to use physical addresses on the
first level page.

Dan informed me there might be a firmware update available to address 
this problem. Is this true?

With the following the kernel stores the virtual address on the PMD 
getting the BDI "to work".

A newer firmware would be much better though.
--- linux-2.6.14-rc4.orig/arch/ppc/kernel/head_8xx.S	2005-10-18 16:59:34.000000000 -0500
+++ linux-2.6.14-rc4/arch/ppc/kernel/head_8xx.S	2005-11-01 05:45:00.000000000 -0600
@@ -320,11 +320,12 @@ InstructionTLBMiss:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
+	tophys(r11,r11)
 
 	/* We have a pte table, so load the MI_TWC with the attributes
 	 * for this "segment."
 	 */
-	ori	r11,r11,1		/* Set valid bit */
+	/*ori	r11,r11,1		 Set valid bit */
 	DO_8xx_CPU6(0x2b80, r3)
 	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
 	DO_8xx_CPU6(0x3b80, r3)
@@ -379,6 +380,7 @@ DataStoreTLBMiss:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
+	tophys(r11,r11)
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -493,6 +495,7 @@ DataTLBError:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, bail */
+	tophys(r11,r11)
 
 	/* We have a pte table, so fetch the pte from the table.
 	 */
diff -Nur -p --exclude-from=linux-2.6.14-rc4/Documentation/dontdiff linux-2.6.14-rc4.orig/include/asm-ppc/pgalloc.h linux-2.6.14-rc4/include/asm-ppc/pgalloc.h
--- linux-2.6.14-rc4.orig/include/asm-ppc/pgalloc.h	2005-10-18 17:00:09.000000000 -0500
+++ linux-2.6.14-rc4/include/asm-ppc/pgalloc.h	2005-11-01 08:02:08.000000000 -0600
@@ -19,16 +19,16 @@ extern void pgd_free(pgd_t *pgd);
 #define __pmd_free_tlb(tlb,x)		do { } while (0)
 #define pgd_populate(mm, pmd, pte)      BUG()
 
-#ifndef CONFIG_BOOKE
+#if defined(CONFIG_BOOKE) || defined(CONFIG_8xx)
 #define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
 #define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
 #else
 #define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
 #define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
 #endif
 
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
diff -Nur -p --exclude-from=linux-2.6.14-rc4/Documentation/dontdiff linux-2.6.14-rc4.orig/include/asm-ppc/pgtable.h linux-2.6.14-rc4/include/asm-ppc/pgtable.h
--- linux-2.6.14-rc4.orig/include/asm-ppc/pgtable.h	2005-10-18 17:00:09.000000000 -0500
+++ linux-2.6.14-rc4/include/asm-ppc/pgtable.h	2005-11-01 08:01:34.000000000 -0600
@@ -719,16 +719,16 @@ extern pgprot_t phys_mem_access_prot(str
  * handler).  On everything else the pmd contains the physical address
  * of the pte page.  -- paulus
  */
-#ifndef CONFIG_BOOKE
+#if defined (CONFIG_BOOKE) || defined CONFIG_8xx
 #define pmd_page_kernel(pmd)	\
-	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
 #else
 #define pmd_page_kernel(pmd)	\
-	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
 #endif
 
 /* to find an entry in a kernel page-table-directory */

Re: BDI2000 and Linux 2.6 kernel

From: Guillaume Autran <hidden>
Date: 2005-11-14 23:47:38

Hi Marcelo,

Despite your patch, I'm still having trouble getting my BDI2000 to translate kernel virtual address to physical address on a 2.6.13 kernel.

What should I look for to make sure I set it up properly ?

Regards,
Guillaume.





Marcelo Tosatti wrote:
quoted hunk
Hi,

Currently gdb over BDI (and I've seen other reports on this list) fails to
translate virtual->physical addresses on PPC 8xx:

*** MMU: address translation for 0xC000C66C failed
*** MMU: address translation for 0xC000C66C failed

Thats because the v2.6 kernel was changed to use physical addresses on the
first level page.

Dan informed me there might be a firmware update available to address this problem. Is this true?

With the following the kernel stores the virtual address on the PMD getting the BDI "to work".

A newer firmware would be much better though.
--- linux-2.6.14-rc4.orig/arch/ppc/kernel/head_8xx.S	2005-10-18 16:59:34.000000000 -0500
+++ linux-2.6.14-rc4/arch/ppc/kernel/head_8xx.S	2005-11-01 05:45:00.000000000 -0600
@@ -320,11 +320,12 @@ InstructionTLBMiss:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
+	tophys(r11,r11)
 
 	/* We have a pte table, so load the MI_TWC with the attributes
 	 * for this "segment."
 	 */
-	ori	r11,r11,1		/* Set valid bit */
+	/*ori	r11,r11,1		 Set valid bit */
 	DO_8xx_CPU6(0x2b80, r3)
 	mtspr	SPRN_MI_TWC, r11	/* Set segment attributes */
 	DO_8xx_CPU6(0x3b80, r3)
@@ -379,6 +380,7 @@ DataStoreTLBMiss:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, don't try to find a pte */
+	tophys(r11,r11)
 
 	/* We have a pte table, so load fetch the pte from the table.
 	 */
@@ -493,6 +495,7 @@ DataTLBError:
 	lwz	r11, 0(r10)	/* Get the level 1 entry */
 	rlwinm.	r10, r11,0,0,19	/* Extract page descriptor page address */
 	beq	2f		/* If zero, bail */
+	tophys(r11,r11)
 
 	/* We have a pte table, so fetch the pte from the table.
 	 */
diff -Nur -p --exclude-from=linux-2.6.14-rc4/Documentation/dontdiff linux-2.6.14-rc4.orig/include/asm-ppc/pgalloc.h linux-2.6.14-rc4/include/asm-ppc/pgalloc.h
--- linux-2.6.14-rc4.orig/include/asm-ppc/pgalloc.h	2005-10-18 17:00:09.000000000 -0500
+++ linux-2.6.14-rc4/include/asm-ppc/pgalloc.h	2005-11-01 08:02:08.000000000 -0600
@@ -19,16 +19,16 @@ extern void pgd_free(pgd_t *pgd);
 #define __pmd_free_tlb(tlb,x)		do { } while (0)
 #define pgd_populate(mm, pmd, pte)      BUG()
 
-#ifndef CONFIG_BOOKE
+#if defined(CONFIG_BOOKE) || defined(CONFIG_8xx)
 #define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
 #define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
 #else
 #define pmd_populate_kernel(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)pte | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = __pa(pte) | _PMD_PRESENT)
 #define pmd_populate(mm, pmd, pte)	\
-		(pmd_val(*(pmd)) = (unsigned long)page_to_virt(pte) | _PMD_PRESENT)
+		(pmd_val(*(pmd)) = (page_to_pfn(pte) << PAGE_SHIFT) | _PMD_PRESENT)
 #endif
 
 extern pte_t *pte_alloc_one_kernel(struct mm_struct *mm, unsigned long addr);
diff -Nur -p --exclude-from=linux-2.6.14-rc4/Documentation/dontdiff linux-2.6.14-rc4.orig/include/asm-ppc/pgtable.h linux-2.6.14-rc4/include/asm-ppc/pgtable.h
--- linux-2.6.14-rc4.orig/include/asm-ppc/pgtable.h	2005-10-18 17:00:09.000000000 -0500
+++ linux-2.6.14-rc4/include/asm-ppc/pgtable.h	2005-11-01 08:01:34.000000000 -0600
@@ -719,16 +719,16 @@ extern pgprot_t phys_mem_access_prot(str
  * handler).  On everything else the pmd contains the physical address
  * of the pte page.  -- paulus
  */
-#ifndef CONFIG_BOOKE
+#if defined (CONFIG_BOOKE) || defined CONFIG_8xx
 #define pmd_page_kernel(pmd)	\
-	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
+	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
+	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
 #else
 #define pmd_page_kernel(pmd)	\
-	((unsigned long) (pmd_val(pmd) & PAGE_MASK))
+	((unsigned long) __va(pmd_val(pmd) & PAGE_MASK))
 #define pmd_page(pmd)		\
-	(mem_map + (__pa(pmd_val(pmd)) >> PAGE_SHIFT))
+	(mem_map + (pmd_val(pmd) >> PAGE_SHIFT))
 #endif
 
 /* to find an entry in a kernel page-table-directory */







_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
-- 
=======================================
Guillaume Autran
Senior Software Engineer
MRV Communications, Inc.
Tel: (978) 952-4932 office
=======================================

Re: BDI2000 and Linux 2.6 kernel

From: Marcelo Tosatti <hidden>
Date: 2005-11-15 10:57:12

On Mon, Nov 14, 2005 at 06:42:11PM -0500, Guillaume Autran wrote:
Hi Marcelo,

Despite your patch, I'm still having trouble getting my BDI2000 to 
translate kernel virtual address to physical address on a 2.6.13 kernel.

What should I look for to make sure I set it up properly ?
Hi Guillaume,

Can you please describe what problems are you having in more detail?

Do you still get "*** MMU: address translation for 0xCxxxxxxx" messages?
Keyboard shortcuts
hback out one level
jnext message in thread
kprevious message in thread
ldrill in
Escclose help / fold thread tree
?toggle this help