RE: AMCC440EP Boot Source

We are looking at the yosemite design but want a CF2 socket=20
for the OS=20
image.   Can U-Boot reside in the EEPROM accessible via I2C? =20

Are you sure that the 440EP can run code from the EEPROM on the I2C?
The 440EP loads configuration information from the EEPROM on the I2C but
I don't know it can run code.=20

=20
This would allow us to remove the flash entirely in favor of=20
the CF2 flash.  If yes, are there any drawbacks to this vs.=20
keeping a small bit of flash soldered to the board?

I'm pretty sure you need to have flash.  If you don't want the onboard
flash you can connect some through the PCI.