Hello.
I'm using linux-2.6.14-rc3-g4c234921 from denx, and I need to access
the flash device. While in 2.4 there is drivers/mtd/maps/icecube.c
(by Wolfgang Denk himself, it seems), I managed to see the flash
using the physmap driver and cmdline partitions.
Does it make sense to add the correct MTD settings to
arch/ppc/configs/lite5200_defconfig (and some hints in
Documentation/powerpc/mpc52xx.txt) without porting the whole of
maps/icecube.c or is there a specific advantage in add a file in maps?
-- well, besides having sensible partitions already ported from 2.4?
In either case, I'm willing to contribute the patch.
These are the winning settings for me, but it doesn't cope with
lite5200 speciments with 8MBi of flash (are there any still around?)
[there's more than strictly needed, actually]
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xff000000
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
/alessandro
The Lite5200 has an official Port to 2.6 by Sylvain Munaut
[off-list ref]
There is an Mapping MTD driver ready.
if it's not in vanilla, you found a patchset on Mailign archive or
on Sylvain's HP.
Am Mon, 17 Oct 2005 18:42:53 +0200 schrieb Alessandro Rubini
[off-list ref] :
Hello.
I'm using linux-2.6.14-rc3-g4c234921 from denx, and I need to access
the flash device. While in 2.4 there is drivers/mtd/maps/icecube.c
(by Wolfgang Denk himself, it seems), I managed to see the flash
using the physmap driver and cmdline partitions.
Does it make sense to add the correct MTD settings to
arch/ppc/configs/lite5200_defconfig (and some hints in
Documentation/powerpc/mpc52xx.txt) without porting the whole of
maps/icecube.c or is there a specific advantage in add a file in maps?
-- well, besides having sensible partitions already ported from 2.4?
In either case, I'm willing to contribute the patch.
These are the winning settings for me, but it doesn't cope with
lite5200 speciments with 8MBi of flash (are there any still around?)
[there's more than strictly needed, actually]
CONFIG_MTD=y
CONFIG_MTD_PARTITIONS=y
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_CHAR=y
CONFIG_MTD_CFI=y
CONFIG_MTD_GEN_PROBE=y
CONFIG_MTD_MAP_BANK_WIDTH_1=y
CONFIG_MTD_MAP_BANK_WIDTH_2=y
CONFIG_MTD_MAP_BANK_WIDTH_4=y
CONFIG_MTD_CFI_I1=y
CONFIG_MTD_CFI_I2=y
CONFIG_MTD_CFI_INTELEXT=y
CONFIG_MTD_CFI_AMDSTD=y
CONFIG_MTD_CFI_AMDSTD_RETRY=0
CONFIG_MTD_CFI_UTIL=y
CONFIG_MTD_PHYSMAP=y
CONFIG_MTD_PHYSMAP_START=0xff000000
CONFIG_MTD_PHYSMAP_LEN=0x1000000
CONFIG_MTD_PHYSMAP_BANKWIDTH=1
/alessandro
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded