kernel 2.6.12.2, octobus ppc405EP: GUNZIP ERROR - must RESET board to recover
From: Peter Fercher <hidden>
Date: 2005-09-19 09:24:14
hi,
trying to run a 2.6.12.2 on a octubus board i get.. (console print =
follows)
U-Boot 1.1.0 (May 11 2004 - 12:01:24)
=20
CPU: IBM PowerPC 405EP Rev. B at 133.333 MHz (PLB=3D133, OPB=3D66, =
EBC=3D33 MHz)
IIC Boot EEPROM disabled
PCI async ext clock used, internal PCI arbiter enabled
16 kB I-Cache 16 kB D-Cache
OCTOBUS Board: ### No HW ID - assuming OCTOBUS HPPC405
I2C: ready
DRAM: 32 MB
FLASH: 4 MB
Hit any key to stop autoboot: 0
ENET Speed is 100 Mbps - FULL duplex connection
BOOTP broadcast 1
TFTP from server 192.168.1.1; our IP address is 192.168.1.2
Filename 'uImage-2.6.12.2'.
Load address: 0x100000
Loading: =
#################################################################
=
#################################################################
##################################################
done
Bytes transferred =3D 919248 (e06d0 hex)
## Booting image at 00100000 ...
Image Name: Linux-2.6.12.2
Created: 2005-09-19 9:03:08 UTC
Image Type: PowerPC Linux Kernel Image (gzip compressed)
Data Size: 919184 Bytes =3D 897.6 kB
Load Address: 00000000
Entry Point: 00000000
Verifying Checksum ... OK
Uncompressing Kernel Image ... Error: inflate() returned -3
GUNZIP ERROR - must RESET board to recover.
any hints ?
cheers, peter