In message [off-list ref] you wrote:
Maybe I meet the big trouble.
I find no powerpc-linux-rpm in my build machine, only have
powerpc-linux-gcc, powerpc-linux-ar .....
What should I do?
You should really READ the documentation. It says, and I explicitely
quoted this in my previous posting:
You must use "${CROSS_COMPILE}rpm" instead.
So instead of trying powerpc-linux-rpm which indeed does not exist
you should run ppc_8xx-rpm or whichever other architecture you're
using (alternatively ppc-rpm would work, but this is undocumented and
not recommended).
Please RTFM!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"...and the fully armed nuclear warheads, are, of course, merely a
courtesy detail."
Yes. I have find out how to do it.
./install -d ppc_6xx
Thanks,
Johnson Cheng
-----Original Message-----
From: wd@denx.de [mailto:wd@denx.de]
Sent: Friday, September 16, 2005 7:23 PM
To: JohnsonCheng
Cc: 'linux-ppc-embedded'
Subject: Re: How to use kerberos in ELDK
In message [off-list ref] you wrote:
Maybe I meet the big trouble.
I find no powerpc-linux-rpm in my build machine, only have
powerpc-linux-gcc, powerpc-linux-ar .....
What should I do?
You should really READ the documentation. It says, and I explicitely
quoted this in my previous posting:
You must use "${CROSS_COMPILE}rpm" instead.
So instead of trying powerpc-linux-rpm which indeed does not exist
you should run ppc_8xx-rpm or whichever other architecture you're
using (alternatively ppc-rpm would work, but this is undocumented and
not recommended).
Please RTFM!
Best regards,
Wolfgang Denk
--
Software Engineering: Embedded and Realtime Systems, Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
"...and the fully armed nuclear warheads, are, of course, merely a
courtesy detail."