Re: How to use kerberos in ELDK

In message [off-list ref] you wrote:

1. For ppc-2005-03-07-src, 
   [root]# rpm -iv krb5-1.2.7-14_3.src.rpm

There is no need to be root to install the ELDK or ELDK packages.

Also, you should read (and  follow)  the  documentation;  the  manual
explains  in  deatil that you have to use the ELLDK's own RPM-tool to
install  (or  remove)  ELDK   packets.   For   details   please   see
http://www.denx.de/twiki/bin/view/DULG/ELDKIndividualPackages

2. For ppc-2005-03-07
   [root]# rpm -iv krb5-libs-ppc_6xx-1.2.7-14_3.ppc.rpm
    Error: Failed dependencies:
		grep-ppc_6xx is needed by krb5-libs-ppc_6xx-1.2.7-14_3
		sh-utils-ppc_6xx is needed by krb5-libs-ppc_6xx-1.2.7-14_3
   [root]# rpm -iv grep-ppc_6xx-2.5.1-4_1.ppc.rpm
    Preparing packages for installation...
		Package grep-ppc_6xx-2.5.1-4_1 is intended for a ppc
architecture 
		File /bin/egrep freom install of grep-ppc_6xx-2.5.1-4_1
conflicts with file from package grep-2.5.1-26

All these are consequences of your wrong commands.

You must use "${CROSS_COMPILE}rpm" instead.

   Ps: My build machine is x86, therefore, my target ppc board has not
enough space to do this, how can I get krb5 library from ELDK on x86?

Actually these get installed by default when you install the ELDK:

	-> ppc_8xx-rpm -q krb5-devel krb5-libs
	krb5-devel-ppc_8xx-1.2.7-14_3
	krb5-libs-ppc_8xx-1.2.7-14_3


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Houston, Tranquillity Base here.  The Eagle has landed.
                                                    -- Neil Armstrong

Dear Wolfgang,

Maybe I meet the big trouble.
I find no powerpc-linux-rpm in my build machine, only have
powerpc-linux-gcc, powerpc-linux-ar .....
What should I do?

Thanks,
Johnson Cheng

-----Original Message-----
From: wd@denx.de [mailto:wd@denx.de] 
Sent: Friday, September 16, 2005 2:33 PM
To: JohnsonCheng
Cc: 'linux-ppc-embedded'
Subject: Re: How to use kerberos in ELDK 

In message [off-list ref] you wrote:

1. For ppc-2005-03-07-src, 
   [root]# rpm -iv krb5-1.2.7-14_3.src.rpm

There is no need to be root to install the ELDK or ELDK packages.

Also, you should read (and  follow)  the  documentation;  the  manual
explains  in  deatil that you have to use the ELLDK's own RPM-tool to
install  (or  remove)  ELDK   packets.   For   details   please   see
http://www.denx.de/twiki/bin/view/DULG/ELDKIndividualPackages

2. For ppc-2005-03-07
   [root]# rpm -iv krb5-libs-ppc_6xx-1.2.7-14_3.ppc.rpm
    Error: Failed dependencies:
		grep-ppc_6xx is needed by krb5-libs-ppc_6xx-1.2.7-14_3
		sh-utils-ppc_6xx is needed by krb5-libs-ppc_6xx-1.2.7-14_3
   [root]# rpm -iv grep-ppc_6xx-2.5.1-4_1.ppc.rpm
    Preparing packages for installation...
		Package grep-ppc_6xx-2.5.1-4_1 is intended for a ppc
architecture 
		File /bin/egrep freom install of grep-ppc_6xx-2.5.1-4_1
conflicts with file from package grep-2.5.1-26

All these are consequences of your wrong commands.

You must use "${CROSS_COMPILE}rpm" instead.

   Ps: My build machine is x86, therefore, my target ppc board has not
enough space to do this, how can I get krb5 library from ELDK on x86?

Actually these get installed by default when you install the ELDK:

	-> ppc_8xx-rpm -q krb5-devel krb5-libs
	krb5-devel-ppc_8xx-1.2.7-14_3
	krb5-libs-ppc_8xx-1.2.7-14_3


Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
Houston, Tranquillity Base here.  The Eagle has landed.
                                                    -- Neil Armstrong