3 messages, 2 authors, 2005-08-19 · open the first message on its own page
From: Vitaly Bordug <hidden>
Date: 2005-08-19 12:44:28
This is preliminary version of 8xx platform definitions. Currently sys section contains only MPC885 and MPC866. Working example of board-specific setup will follow. Signed-off-by: Vitaly Bordug <redacted> -- Sincerely, Vitaly
From: Dan Malek <hidden>
Date: 2005-08-19 15:06:23
On Aug 19, 2005, at 8:44 AM, Vitaly Bordug wrote:
+#define MPC8xx_INT_FEC1 SIU_LEVEL1 +#define MPC8xx_INT_FEC2 SIU_LEVEL3 + +#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) + +/* Offset from IMMAP base address */ +#define MPC8xx_SCC1_OFFSET (0xa00) +#define MPC8xx_SCC1_SIZE (0x18) +#define MPC8xx_SCC2_OFFSET (0xa20) +#define MPC8xx_SCC2_SIZE (0x18) +#define MPC8xx_SCC3_OFFSET (0xa40) +#define MPC8xx_SCC3_SIZE (0x18) +#define MPC8xx_SCC4_OFFSET (0xa60) +#define MPC8xx_SCC4_SIZE (0x18) +#define MPC8xx_SMC1_OFFSET (0xa82) +#define MPC8xx_SMC1_SIZE (0x0f) +#define MPC8xx_SMC2_OFFSET (0xa92) +#define MPC8xx_SMC2_SIZE (0x0d) +#define MPC8xx_FEC1_OFFSET (0xe00) +#define MPC8xx_FEC1_SIZE (0x88) +#define MPC8xx_FEC2_OFFSET (0x1e00) +#define MPC8xx_FEC2_SIZE (0x88) + +#define MPC8xx_DPARAM_SCC1_OFFSET (0x3C00) +#define MPC8xx_DPARAM_SCC1_SIZE (0x80) +#define MPC8xx_DPARAM_SCC2_OFFSET (0x3D00) +#define MPC8xx_DPARAM_SCC2_SIZE (0x80) +#define MPC8xx_DPARAM_SCC3_OFFSET (0x3E00) +#define MPC8xx_DPARAM_SCC3_SIZE (0x80) +#define MPC8xx_DPARAM_SCC4_OFFSET (0x3F00) +#define MPC8xx_DPARAM_SCC4_SIZE (0x80) +#define MPC8xx_DPARAM_SMC1_OFFSET (0x3E80) +#define MPC8xx_DPARAM_SMC1_SIZE (0x40) +#define MPC8xx_DPARAM_SMC2_OFFSET (0x3F80) +#define MPC8xx_DPARAM_SMC2_SIZE (0x40)
All of these #defines should already be in a header file somewhere, and if they aren't, should be in the generic CPM header file. Please clean this up. Thanks. -- Dan
From: Vitaly Bordug <hidden>
Date: 2005-08-19 15:12:54
Dan Malek wrote:
On Aug 19, 2005, at 8:44 AM, Vitaly Bordug wrote:quoted
+#define MPC8xx_INT_FEC1 SIU_LEVEL1 +#define MPC8xx_INT_FEC2 SIU_LEVEL3 + +#define MPC8xx_INT_SCC1 (CPM_IRQ_OFFSET + CPMVEC_SCC1) +#define MPC8xx_INT_SCC2 (CPM_IRQ_OFFSET + CPMVEC_SCC2) +#define MPC8xx_INT_SCC3 (CPM_IRQ_OFFSET + CPMVEC_SCC3) +#define MPC8xx_INT_SCC4 (CPM_IRQ_OFFSET + CPMVEC_SCC4) +#define MPC8xx_INT_SMC1 (CPM_IRQ_OFFSET + CPMVEC_SMC1) +#define MPC8xx_INT_SMC2 (CPM_IRQ_OFFSET + CPMVEC_SMC2) + +/* Offset from IMMAP base address */ +#define MPC8xx_SCC1_OFFSET (0xa00) +#define MPC8xx_SCC1_SIZE (0x18) +#define MPC8xx_SCC2_OFFSET (0xa20) +#define MPC8xx_SCC2_SIZE (0x18) +#define MPC8xx_SCC3_OFFSET (0xa40) +#define MPC8xx_SCC3_SIZE (0x18) +#define MPC8xx_SCC4_OFFSET (0xa60) +#define MPC8xx_SCC4_SIZE (0x18) +#define MPC8xx_SMC1_OFFSET (0xa82) +#define MPC8xx_SMC1_SIZE (0x0f) +#define MPC8xx_SMC2_OFFSET (0xa92) +#define MPC8xx_SMC2_SIZE (0x0d) +#define MPC8xx_FEC1_OFFSET (0xe00) +#define MPC8xx_FEC1_SIZE (0x88) +#define MPC8xx_FEC2_OFFSET (0x1e00) +#define MPC8xx_FEC2_SIZE (0x88) + +#define MPC8xx_DPARAM_SCC1_OFFSET (0x3C00) +#define MPC8xx_DPARAM_SCC1_SIZE (0x80) +#define MPC8xx_DPARAM_SCC2_OFFSET (0x3D00) +#define MPC8xx_DPARAM_SCC2_SIZE (0x80) +#define MPC8xx_DPARAM_SCC3_OFFSET (0x3E00) +#define MPC8xx_DPARAM_SCC3_SIZE (0x80) +#define MPC8xx_DPARAM_SCC4_OFFSET (0x3F00) +#define MPC8xx_DPARAM_SCC4_SIZE (0x80) +#define MPC8xx_DPARAM_SMC1_OFFSET (0x3E80) +#define MPC8xx_DPARAM_SMC1_SIZE (0x40) +#define MPC8xx_DPARAM_SMC2_OFFSET (0x3F80) +#define MPC8xx_DPARAM_SMC2_SIZE (0x40)All of these #defines should already be in a header file somewhere, and if they aren't, should be in the generic CPM header file. Please clean this up. Thanks. -- Dan
I am going to move interrupts to the generic CPM header file, others I guess may be cleanup'ed, with replace respective defines in the source by pure numbers (as was done previously for PQ2 platform stuff). -- Sincerely, Vitaly