Hi,
I am trying to pass ram=3D argument to kernel and my bootcmd is as shown be=
low
tftpboot 03000000 prashant/root.img; tftpboot 00100000 prashant/uImage; set=
env b
ootargs root=3D/dev/ram ram=3D60M
ip=3D10.67.65.68:10.67.65.39:255.255.255.0:MPC8270:eth1:off; bootm
00100000 03000000
I have 64 MB RAM on my system. With above command if I boot the board and s=
ee
cat /proc/meminfo I still see 64MB RAM.
Can anyone tell me, how to pass ram argument.=20
Thanks,
Prashant
I think you want mem=60M
- kumar
On Tue, 9 Aug 2005, Prashant Alange wrote:
Hi,
I am trying to pass ram= argument to kernel and my bootcmd is as shown below
tftpboot 03000000 prashant/root.img; tftpboot 00100000 prashant/uImage; setenv b
ootargs root=/dev/ram ram=60M
ip=10.67.65.68:10.67.65.39:255.255.255.0:MPC8270:eth1:off; bootm
00100000 03000000
I have 64 MB RAM on my system. With above command if I boot the board and see
cat /proc/meminfo I still see 64MB RAM.
Can anyone tell me, how to pass ram argument.
Thanks,
Prashant
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded