Hello!
I gave the MPC885ADS support recently added by Andrei Konovalov=20
a try - but no luck: booting 2.6.13-rc5 with u-boot 1.1.2=20
(tftpboot & bootm) hangs after uncompressing.
Did anybody succeed with this?
Applied were the following patches from patchwork.ozlabs.org:
* 8xx_cpm_hostalloc
* all fixes to fec.c
The board boots an 2.4-Kernel just fine. Did i miss some patches=20
for U-Boot?
Best regards,
Peter
Schaefer-Hutter, Peter wrote:
Hello!
I gave the MPC885ADS support recently added by Andrei Konovalov
a try - but no luck: booting 2.6.13-rc5 with u-boot 1.1.2
(tftpboot & bootm) hangs after uncompressing.
Did anybody succeed with this?
Applied were the following patches from patchwork.ozlabs.org:
* 8xx_cpm_hostalloc
* all fixes to fec.c
The board boots an 2.4-Kernel just fine. Did i miss some patches
for U-Boot?
Best regards,
Peter
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded
Mentioned support should work `out-of-the box`.
Make sure you have console=ttyCPM0,115200 (or whatever baudrate you
have) within bootargs in the U-Boot environment. U-Boot modification is
needed only if you wish to have both FEC MAC addresses configured via
U-Boot env as well. Also only the related defconfig should be used.
--
Sincerely,
Vitaly