Hi all,
I wrote a module driver to manage interruptions. I have an interruption on
MPC885 IRQ7 activated by a push button that provides a negative pulse of
200 ns width.
When the device is open, i call request_irq() to install the interrupt
handler:
int ret = request_irq(SIU_IRQ7, fpgadriver_irq_save_handler, SA_INTERRUPT,
FPGA_ID, NULL);
void fpgadriver_irq_save_handler(int irq, void *dev_id, struct pt_regs
*regs)
{
fpga_it_source=FPGA_IRQ_SAVE;
printk( "fpgadriver: fpgadriver_irq_save_handler for device \n");
/* Prepare a task */
PREPARE_TQUEUE(&fpgadriver_bh_task, fpgadriver_bh_handler, dev_id);
/* Add a task to the immediate bottom half and mark it for schedule */
queue_task(&fpgadriver_bh_task, &tq_immediate);
mark_bh(IMMEDIATE_BH);
}
my read() is like that :
static ssize_t fpgadriver_read(struct file *file, char *buf, size_t count,
loff_t *ppos)
{
//mise a jour de l'indicateur d'etat d'endormissement
wakeups++;
interruptible_sleep_on(&readq);
buf[0]=fpga_it_source;
printk("fpgadriver_read \n");
return 0;
}
I have the wake_up_interruptible(&reaq) in fpgadriver_bh_handler(). My
problem is that fpgadriver_irq_save_handler() is never called as if there
is no interruption.
Is there something else to modify to validate the interruption ? Is
SIU_IRQ7 the right value for my interruption ? What have i to check ?
Thanks for your reply.
Sophie CARAYOL
Pins on the 8xx are highly configurable. I recommend that you check
that the pin has not been configured for another function. For example
on the 862 the SIU_IRQ7 pin doubles as the MII tx clock.
Alex
On Wed, 15 Jun 2005 10:35:41 +0200
scarayol@assystembrime.com wrote:
Hi all,
I wrote a module driver to manage interruptions. I have an
interruption on MPC885 IRQ7 activated by a push button that provides a
negative pulse of 200 ns width.
When the device is open, i call request_irq() to install the interrupt
handler:
int ret = request_irq(SIU_IRQ7, fpgadriver_irq_save_handler,
SA_INTERRUPT, FPGA_ID, NULL);
void fpgadriver_irq_save_handler(int irq, void *dev_id, struct pt_regs
*regs)
{
fpga_it_source=FPGA_IRQ_SAVE;
printk( "fpgadriver: fpgadriver_irq_save_handler for device \n");
/* Prepare a task */
PREPARE_TQUEUE(&fpgadriver_bh_task, fpgadriver_bh_handler, dev_id);
/* Add a task to the immediate bottom half and mark it for schedule
*/ queue_task(&fpgadriver_bh_task, &tq_immediate);
mark_bh(IMMEDIATE_BH);
}
my read() is like that :
static ssize_t fpgadriver_read(struct file *file, char *buf, size_t
count, loff_t *ppos)
{
//mise a jour de l'indicateur d'etat d'endormissement
wakeups++;
interruptible_sleep_on(&readq);
buf[0]=fpga_it_source;
printk("fpgadriver_read \n");
return 0;
}
I have the wake_up_interruptible(&reaq) in fpgadriver_bh_handler(). My
problem is that fpgadriver_irq_save_handler() is never called as if
there is no interruption.
Is there something else to modify to validate the interruption ? Is
SIU_IRQ7 the right value for my interruption ? What have i to check ?
Thanks for your reply.
Sophie CARAYOL
_______________________________________________
Linuxppc-embedded mailing list
Linuxppc-embedded@ozlabs.org
https://ozlabs.org/mailman/listinfo/linuxppc-embedded