3 messages, 3 authors, 2005-06-06 · open the first message on its own page
From: Vijay Padiyar <hidden>
Date: 2005-06-06 05:58:27
Hi I wanted to know whether the Linux 2.6 kernel has an implementation of the STP protocol, and if so, where can I find the relevant code. Regards Vijay Padiyar http://www.vijaypadiyar.eu.tf
From: Tore Martin Hagen <hidden>
Date: 2005-06-06 06:51:21
Hi, I am using a MPC8266ADS-PCI board and u-boot with the CONFIG_BOOTCOUNT_LIMIT. If i stop u-boot before it starts Linux I can see that the bootcount variable increments nicely. But if i dump the content from flash (dd if=/dev/mtd/1 of=a1out bs=1k) and check the content it is always bootcount=1 So how can I reset the bootcount if it is always 1, or rather where is the real bootcount stored? /Tore **
From: Stefan Nickl <hidden>
Date: 2005-06-06 08:00:42
On Mon, 2005-06-06 at 11:10 +0530, Vijay Padiyar wrote:
Hi I wanted to know whether the Linux 2.6 kernel has an implementation of the STP protocol, and if so, where can I find the relevant code. Regards Vijay Padiyar
Spanning tree protocol: /usr/src/linux/net/bridge/br_stp* -- Stefan Nickl Kontron Modular Computers