udhcp problem

My configuration is as follows:

			_______________________
			|        ROUTER	    |
			|	___	    ___   |
			|_____| |_______| |___|
			   LAN	 WAN
				/\	     /\
				 |		|
  		   Stand Alone      Company    =20
		 Windows System	   Network
			   (eth0)       (eth1)

I have a udhcp server running on eth0. When I give the command on the
windows machine "ipconfig /renew", the router assigns an IP address to
the System in the range 192.168.1.x while the router itself has the IP
192.168.1.1 (default). I can ping the router from the system and
vice-versa.

I manually assigned a static IP to eth1 as 172.19.56.x insync with the
company IP address scheme. I can ping from the router to any other
system on the network.

Now when I try to ping a system or eth1 from the windows machine I get a
time out. But if I have to manually assign an IP to the windows
machine(ie not through the udhcp server) I am able to ping eth1 and any
other system on the network.

Any ideas as to how and why? If you need more inform please let me
know...


Atit
		=09


DISCLAIMER:
This email (including any attachments) is intended for the sole use of =
the intended recipient/s and may contain material that is CONFIDENTIAL =
AND PRIVATE COMPANY INFORMATION. Any review or reliance by others or =
copying or distribution or forwarding of any or all of the contents in =
this message is STRICTLY PROHIBITED. If you are not the intended =
recipient, please contact the sender by email and delete all copies; =
your cooperation in this regard is appreciated.

On 5/12/05, Atit_Shah [off-list ref] wrote:

My configuration is as follows:
=20
                        _______________________
                        |        ROUTER     |
                        |       ___         ___   |
                        |_____| |_______| |___|
                           LAN   WAN
                                /\           /\
                                 |              |
                   Stand Alone      Company
                 Windows System    Network
                           (eth0)       (eth1)
=20
I have a udhcp server running on eth0. When I give the command on the
windows machine "ipconfig /renew", the router assigns an IP address to
the System in the range 192.168.1.x while the router itself has the IP
192.168.1.1 (default). I can ping the router from the system and
vice-versa.
=20
I manually assigned a static IP to eth1 as 172.19.56.x insync with the
company IP address scheme. I can ping from the router to any other
system on the network.
=20
Now when I try to ping a system or eth1 from the windows machine I get a
time out. But if I have to manually assign an IP to the windows
machine(ie not through the udhcp server) I am able to ping eth1 and any
other system on the network.
=20

How have you set up routing?  Are you trying to do NAT?  You are
probably going to need to set up some IPTables.  It's more than just a
matter of bringing up both interfaces.  (BTW, congratulations on
getting both ports working now)  Have you read through any of the
networking howtos on linuxdocs.org?

g.